Basic machine port for the Artpec-6 SoC from Axis
Communications.
Signed-off-by: Lars Persson <lar...@axis.com>
---
arch/arm/Kconfig | 2 ++
arch/arm/Makefile | 1 +
arch/arm/mach-artpec/Kconfig | 22 ++++++++++++
arch/arm/mach-artpec/Makefile | 1 +
arch/arm/mach-artpec/board-artpec6.c | 66 ++++++++++++++++++++++++++++++++++++
5 files changed, 92 insertions(+)
create mode 100644 arch/arm/mach-artpec/Kconfig
create mode 100644 arch/arm/mach-artpec/Makefile
create mode 100644 arch/arm/mach-artpec/board-artpec6.c
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 4f799e5..e1565dd 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -724,6 +724,8 @@ source "arch/arm/mach-mvebu/Kconfig"
source "arch/arm/mach-alpine/Kconfig"
+source "arch/arm/mach-artpec/Kconfig"
+
source "arch/arm/mach-asm9260/Kconfig"
source "arch/arm/mach-at91/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index fe25410..4eb24c6 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -154,6 +154,7 @@ textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000
# Machine directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
machine-$(CONFIG_ARCH_ALPINE) += alpine
+machine-$(CONFIG_ARCH_ARTPEC) += artpec
machine-$(CONFIG_ARCH_AT91) += at91
machine-$(CONFIG_ARCH_AXXIA) += axxia
machine-$(CONFIG_ARCH_BCM) += bcm
diff --git a/arch/arm/mach-artpec/Kconfig b/arch/arm/mach-artpec/Kconfig
new file mode 100644
index 0000000..eaa73d6
--- /dev/null
+++ b/arch/arm/mach-artpec/Kconfig
@@ -0,0 +1,22 @@
+menuconfig ARCH_ARTPEC
+ bool "Axis Communications ARM based ARTPEC SoCs" if ARCH_MULTI_V7
+
+if ARCH_ARTPEC
+
+config MACH_ARTPEC6
+ bool "Axis ARTPEC-6 ARM Cortex A9 Platform" if ARCH_MULTI_V7
+ select ARM_AMBA
+ select ARM_GIC
+ select ARM_GLOBAL_TIMER
+ select ARM_PSCI
+ select COMMON_CLK
+ select GENERIC_CLOCKEVENTS
+ select HAVE_ARM_ARCH_TIMER
+ select HAVE_ARM_SCU
+ select HAVE_ARM_TWD if SMP
+ select SPARSE_IRQ
+ select USE_OF
+ help
+ Support for Axis ARTPEC-6 ARM Cortex A9 Platform
+
+endif
diff --git a/arch/arm/mach-artpec/Makefile b/arch/arm/mach-artpec/Makefile
new file mode 100644
index 0000000..78325f0
--- /dev/null
+++ b/arch/arm/mach-artpec/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_MACH_ARTPEC6) := board-artpec6.o
diff --git a/arch/arm/mach-artpec/board-artpec6.c
b/arch/arm/mach-artpec/board-artpec6.c
new file mode 100644
index 0000000..6d7a59f
--- /dev/null
+++ b/arch/arm/mach-artpec/board-artpec6.c
@@ -0,0 +1,66 @@
+/*
+ * ARTPEC-6 device support.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/amba/bus.h>
+#include <linux/clocksource.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/arm-gic.h>
+#include <linux/of_platform.h>
+#include <linux/of.h>
+#include <linux/clk-provider.h>
+#include <linux/smp.h>
+#include <asm/smp_scu.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/psci.h>
+#include <linux/arm-smccc.h>
+
+#define ARTPEC6_DMACFG 0xf8000010
+#define ARTPEC6_DMACFG_UARTS_BURST 0xff
+
+#define SECURE_OP_L2C_WRITEREG 0xb4000001
+
+static void __init artpec6_init_machine(void)
+{
+ void __iomem *dmacfg;
+
+ /* Use PL011 DMA Burst Request signal instead of DMA Single Request */
+ dmacfg = ioremap(ARTPEC6_DMACFG, 4);
+ if (dmacfg) {
+ __raw_writel(ARTPEC6_DMACFG_UARTS_BURST, dmacfg);
+ iounmap(dmacfg);
+ }
+
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static void artpec6_l2c310_write_sec(unsigned long val, unsigned reg)
+{
+ struct arm_smccc_res res;
+
+ arm_smccc_smc(SECURE_OP_L2C_WRITEREG, reg, val, 0,
+ 0, 0, 0, 0, &res);
+
+ WARN_ON(res.a0);
+}
+
+static const char * const artpec6_dt_match[] = {
+ "axis,artpec6",
+ NULL
+};
+
+DT_MACHINE_START(ARTPEC6, "Axis ARTPEC-6 Platform")
+ .l2c_aux_val = 0x0C000000,
+ .l2c_aux_mask = 0xF3FFFFFF,
+ .l2c_write_sec = artpec6_l2c310_write_sec,
+ .init_irq = irqchip_init,
+ .init_machine = artpec6_init_machine,
+ .dt_compat = artpec6_dt_match,
+MACHINE_END
--
2.1.4
