On Mon, 01 Feb 2016, Steve Twiss wrote:
> From: Steve Twiss <[email protected]>
>
> Add an updated set of registers listed in the core regmap_range volatile
> ranges defined for the DA9062.
>
> These new registers contain bits that cannot be considered under the full
> control of software. Under various conditions the hardware will set and/or
> automatically clear bit(s) contained in these registers.
>
> When using a cached version of regmap, the volatility of these registers must
> be identified otherwise the regmap operations may not ensure the registers
> are explicitly altered.
>
> As well as updating the list of volatile registers, this change will fix a
> corner case discovered in the DA9063 ONKEY which is used by the DA9062 core.
>
> In the ONKEY case, the CONTROL_B register is now listed as volatile in the
> regmap_range because it contains the bit field NONKEY_LOCK. This bit can be
> altered by hardware, in which case regmap must be notified of its ability
> to be manpiulated outside of software control.
>
> Signed-off-by: Steve Twiss <[email protected]>
Applied, thanks.
> ---
> Checks performed with linux-next/v4.5-rc1/scripts/checkpatch.pl
> da9062-core.c total: 0 errors, 0 warnings, 554 lines checked
> This patch applies against linux-next and v4.5-rc1
>
> Regards,
> Steve
>
>
> drivers/mfd/da9062-core.c | 23 ++++++++++++++++++++++-
> 1 file changed, 22 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mfd/da9062-core.c b/drivers/mfd/da9062-core.c
> index a9ad024..8f873866 100644
> --- a/drivers/mfd/da9062-core.c
> +++ b/drivers/mfd/da9062-core.c
> @@ -388,11 +388,32 @@ static const struct regmap_range
> da9062_aa_volatile_ranges[] = {
> .range_min = DA9062AA_STATUS_D,
> .range_max = DA9062AA_EVENT_C,
> }, {
> - .range_min = DA9062AA_CONTROL_F,
> + .range_min = DA9062AA_CONTROL_A,
> + .range_max = DA9062AA_CONTROL_B,
> + }, {
> + .range_min = DA9062AA_CONTROL_E,
> .range_max = DA9062AA_CONTROL_F,
> }, {
> + .range_min = DA9062AA_BUCK2_CONT,
> + .range_max = DA9062AA_BUCK4_CONT,
> + }, {
> + .range_min = DA9062AA_BUCK3_CONT,
> + .range_max = DA9062AA_BUCK3_CONT,
> + }, {
> + .range_min = DA9062AA_LDO1_CONT,
> + .range_max = DA9062AA_LDO4_CONT,
> + }, {
> + .range_min = DA9062AA_DVC_1,
> + .range_max = DA9062AA_DVC_1,
> + }, {
> .range_min = DA9062AA_COUNT_S,
> .range_max = DA9062AA_SECOND_D,
> + }, {
> + .range_min = DA9062AA_SEQ,
> + .range_max = DA9062AA_SEQ,
> + }, {
> + .range_min = DA9062AA_EN_32K,
> + .range_max = DA9062AA_EN_32K,
> },
> };
>
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
