Lee,
Thanks for your review.
On 2016/2/15 16:32, Lee Jones wrote:
> On Sun, 14 Feb 2016, Chen Feng wrote:
>
>> DT bindings for hisilicon hi655x MFD PMIC chip.
>>
>> Signed-off-by: Chen Feng <puck.c...@hisilicon.com>
>> Signed-off-by: Fei Wang <w...@huawei.com>
>> Signed-off-by: Xinwei Kong <kong.kongxin...@hisilicon.com>
>> Reviewed-by: Haojian Zhuang <haojian.zhu...@linaro.org>
>> ---
>> .../devicetree/bindings/mfd/hisilicon,hi655x.txt | 27
>> ++++++++++++++++++++++
>> 1 file changed, 27 insertions(+)
>> create mode 100644
>> Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
>
> For my own reference:
> Acked-by: Lee Jones <lee.jo...@linaro.org>
>
Will you merge this into your git-repo?
git git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git
I saw mark already merged the part of regulator into his git tree.
Hi Wei,
Could you help merge the DTS part of these patch sets.
>> diff --git a/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
>> b/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
>> new file mode 100644
>> index 0000000..0548569
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
>> @@ -0,0 +1,27 @@
>> +Hisilicon Hi655x Power Management Integrated Circuit (PMIC)
>> +
>> +The hardware layout for access PMIC Hi655x from AP SoC Hi6220.
>> +Between PMIC Hi655x and Hi6220, the physical signal channel is SSI.
>> +We can use memory-mapped I/O to communicate.
>> +
>> ++----------------+ +-------------+
>> +| | | |
>> +| Hi6220 | SSI bus | Hi655x |
>> +| |-------------| |
>> +| |(REGMAP_MMIO)| |
>> ++----------------+ +-------------+
>> +
>> +Required properties:
>> +- compatible: Should be "hisilicon,hi655x-pmic".
>> +- reg: Base address of PMIC on Hi6220 SoC.
>> +- interrupt-controller: Hi655x has internal IRQs (has own IRQ domain).
>> +- pmic-gpios: The GPIO used by PMIC IRQ.
>> +
>> +Example:
>> + pmic: pmic@f8000000 {
>> + compatible = "hisilicon,hi655x-pmic";
>> + reg = <0x0 0xf8000000 0x0 0x1000>;
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + pmic-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
>> + }
>
