On Tuesday 02 January 2007 13:04, Ken Moffat wrote: > On Tue, Jan 02, 2007 at 12:25:57PM -0500, Len Brown wrote: > > > it's been nothing but trouble in 32-bit mode. > > > It still works fine when I boot it in 64-bit mode. > > > > A shot in the dark at the spontaneous reset issue, but no clue on the 32 vs > > 64-bit observation... > > > > See if ACPI exports any temperature readings under > > /proc/acpi/thermal_zone/*/temperature > > and if so, keep an eye on them to see if there is an indication of a > > thermal problem. > > > > ( And if ACPI doesn't, maybe lmsensors can find something.) > > > > cheers, > > -Len > > Thanks, but there is nothing there. I never managed to get > lmsensors configured (as in 'calibrated') for the hardware I tried it > on, but I was starting to think about retrying it. But first, I'm > just about to start testing with memtest86+ in case something in the > memory has gone bad.
You might remove and re-insert the DIMMS. Sometimes there are poor contacts if the DIMMS are not fully seated and clicked in. The real mystery is the 32 vs 64-bit thing. Are the devices configured the same way -- ie are they both in IOAPIC mode and /proc/interrupts looks the same for both modes? -Len - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/