On Sun, Feb 21, 2016 at 12:41:21PM +0100, Álvaro Fernández Rojas wrote: > This adds a device tree example for SFR Neufbox4 (Sercomm version), which > also serves as a real example for brcm,bcm6358-leds. > > Signed-off-by: Álvaro Fernández Rojas <[email protected]> > --- > v2: Remove led0 alias and use stdout-path only > > .../devicetree/bindings/mips/brcm/soc.txt | 2 +- > arch/mips/bmips/Kconfig | 4 + > arch/mips/boot/dts/brcm/Makefile | 2 + > arch/mips/boot/dts/brcm/bcm6358.dtsi | 111 > +++++++++++++++++++++ > arch/mips/boot/dts/brcm/bcm96358nb4ser.dts | 46 +++++++++ > 5 files changed, 164 insertions(+), 1 deletion(-) > create mode 100644 arch/mips/boot/dts/brcm/bcm6358.dtsi > create mode 100644 arch/mips/boot/dts/brcm/bcm96358nb4ser.dts
A couple of minor things, otherwise: Acked-by: Rob Herring <[email protected]> > > diff --git a/Documentation/devicetree/bindings/mips/brcm/soc.txt > b/Documentation/devicetree/bindings/mips/brcm/soc.txt > index 7bab90c..e58a4f6 100644 > --- a/Documentation/devicetree/bindings/mips/brcm/soc.txt > +++ b/Documentation/devicetree/bindings/mips/brcm/soc.txt > @@ -4,7 +4,7 @@ Required properties: > > - compatible: "brcm,bcm3384", "brcm,bcm33843" > "brcm,bcm3384-viper", "brcm,bcm33843-viper" > - "brcm,bcm6328", "brcm,bcm6368", > + "brcm,bcm6328", "brcm,bcm6358", "brcm,bcm6368", > "brcm,bcm7125", "brcm,bcm7346", "brcm,bcm7358", "brcm,bcm7360", > "brcm,bcm7362", "brcm,bcm7420", "brcm,bcm7425" > > diff --git a/arch/mips/bmips/Kconfig b/arch/mips/bmips/Kconfig > index e2c4fd6..264328d 100644 > --- a/arch/mips/bmips/Kconfig > +++ b/arch/mips/bmips/Kconfig > @@ -21,6 +21,10 @@ config DT_BCM93384WVG_VIPER > bool "BCM93384WVG Viper CPU (EXPERIMENTAL)" > select BUILTIN_DTB > > +config DT_BCM96358NB4SER > + bool "BCM96358NB4SER" > + select BUILTIN_DTB > + > config DT_BCM96368MVWG > bool "BCM96368MVWG" > select BUILTIN_DTB > diff --git a/arch/mips/boot/dts/brcm/Makefile > b/arch/mips/boot/dts/brcm/Makefile > index eabeb60..fda9d38 100644 > --- a/arch/mips/boot/dts/brcm/Makefile > +++ b/arch/mips/boot/dts/brcm/Makefile > @@ -1,5 +1,6 @@ > dtb-$(CONFIG_DT_BCM93384WVG) += bcm93384wvg.dtb > dtb-$(CONFIG_DT_BCM93384WVG_VIPER) += bcm93384wvg_viper.dtb > +dtb-$(CONFIG_DT_BCM96358NB4SER) += bcm96358nb4ser.dtb > dtb-$(CONFIG_DT_BCM96368MVWG) += bcm96368mvwg.dtb > dtb-$(CONFIG_DT_BCM9EJTAGPRB) += bcm9ejtagprb.dtb > dtb-$(CONFIG_DT_BCM97125CBMB) += bcm97125cbmb.dtb > @@ -14,6 +15,7 @@ dtb-$(CONFIG_DT_BCM97435SVMB) += > bcm97435svmb.dtb > dtb-$(CONFIG_DT_NONE) += \ > bcm93384wvg.dtb \ > bcm93384wvg_viper.dtb \ > + bcm96358nb4ser.dtb \ > bcm96368mvwg.dtb \ > bcm9ejtagprb.dtb \ > bcm97125cbmb.dtb \ > diff --git a/arch/mips/boot/dts/brcm/bcm6358.dtsi > b/arch/mips/boot/dts/brcm/bcm6358.dtsi > new file mode 100644 > index 0000000..4da824f > --- /dev/null > +++ b/arch/mips/boot/dts/brcm/bcm6358.dtsi > @@ -0,0 +1,111 @@ > +/ { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "brcm,bcm6358"; > + > + cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + > + mips-hpt-frequency = <150000000>; > + > + cpu@0 { > + compatible = "brcm,bmips4350"; > + device_type = "cpu"; > + reg = <0>; > + }; > + > + cpu@1 { > + compatible = "brcm,bmips4350"; > + device_type = "cpu"; > + reg = <1>; > + }; > + }; > + > + clocks { > + periph_clk: periph_clk { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <50000000>; > + }; > + }; > + > + aliases { > + uart0 = &uart0; > + uart1 = &uart1; > + }; > + > + cpu_intc: cpu_intc { > + #address-cells = <0>; > + compatible = "mti,cpu-interrupt-controller"; > + > + interrupt-controller; > + #interrupt-cells = <1>; > + }; > + > + ubus { > + #address-cells = <1>; > + #size-cells = <1>; > + > + compatible = "simple-bus"; > + ranges; > + > + periph_cntl: syscon@fffe0000 { > + compatible = "syscon"; > + reg = <0xfffe0000 0xc>; > + little-endian; > + }; > + > + reboot: syscon-reboot@fffe0008 { > + compatible = "syscon-reboot"; > + regmap = <&periph_cntl>; > + offset = <0x8>; > + mask = <0x1>; > + }; > + > + periph_intc: periph_intc@fffe000c { interrupt-controller@... > + compatible = "brcm,bcm3380-l2-intc"; > + reg = <0xfffe0010 0x4 0xfffe000c 0x4>, > + <0xfffe003c 0x4 0xfffe0038 0x4>; > + > + interrupt-controller; > + #interrupt-cells = <1>; > + > + interrupt-parent = <&cpu_intc>; > + interrupts = <2>; > + }; > + > + leds0: led-controller@fffe00d0 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "brcm,bcm6358-leds"; > + reg = <0xfffe00d0 0x8>; > + > + status = "disabled"; > + }; > + > + uart0: serial@fffe0100 { > + compatible = "brcm,bcm6345-uart"; > + reg = <0xfffe0100 0x18>; > + > + interrupt-parent = <&periph_intc>; > + interrupts = <2>; > + > + clocks = <&periph_clk>; > + > + status = "disabled"; > + }; > + > + uart1: serial@fffe0120 { > + compatible = "brcm,bcm6345-uart"; > + reg = <0xfffe0120 0x18>; > + > + interrupt-parent = <&periph_intc>; > + interrupts = <3>; > + > + clocks = <&periph_clk>; > + > + status = "disabled"; > + }; > + }; > +}; > diff --git a/arch/mips/boot/dts/brcm/bcm96358nb4ser.dts > b/arch/mips/boot/dts/brcm/bcm96358nb4ser.dts > new file mode 100644 > index 0000000..c313e2c > --- /dev/null > +++ b/arch/mips/boot/dts/brcm/bcm96358nb4ser.dts > @@ -0,0 +1,46 @@ > +/dts-v1/; > + > +/include/ "bcm6358.dtsi" > + > +/ { > + compatible = "sfr,nb4-ser", "brcm,bcm6358"; > + model = "SFR Neufbox 4 (Sercomm)"; > + > + memory@0 { > + device_type = "memory"; > + reg = <0x00000000 0x02000000>; > + }; > + > + chosen { > + stdout-path = &uart0; > + }; > +}; > + > +&leds0 { > + status = "ok"; > + > + alarm_white@0 { led@0 > + reg = <0>; > + active-low; > + label = "nb4-ser:white:alarm"; > + }; > + tv_white@2 { led@2 and so on. > + reg = <2>; > + active-low; > + label = "nb4-ser:white:tv"; > + }; > + tel_white@3 { > + reg = <3>; > + active-low; > + label = "nb4-ser:white:tel"; > + }; > + adsl_white@4 { > + reg = <4>; > + active-low; > + label = "nb4-ser:white:adsl"; > + }; > +}; > + > +&uart0 { > + status = "okay"; > +}; > -- > 1.9.1 > > -- > To unsubscribe from this list: send the line "unsubscribe devicetree" in > the body of a message to [email protected] > More majordomo info at http://vger.kernel.org/majordomo-info.html
