On Tue, Feb 23, 2016 at 01:54:57PM +0300, Sergei Ianovich wrote: > DS1302 is half-duplex SPI device. The driver respects this fact now. > > Pin configurations should be implemented using SPI subsystem. > > Signed-off-by: Sergei Ianovich <[email protected]> > CC: Alexandre Belloni <[email protected]> > CC: Rob Herring <[email protected]> > > v6..v7 > * change binding and doc file names > > v5..v6 > * rewrite the driver as an SPI slave device > * use "maxim" for vendor name per Kconfig > * stop changing device RAM in device presence test > * only return time from device if valid > * use burst mode for reading/writing time > * dropped charging control. I cannot test it, and it looks broken > > v4..v5 > * drop THIS_MODULE from struct platform driver > * use "dallas" for vendor name per vendor-prefixes.txt > > v3..v4 > * move DTS bindings to a different patch > > v2..v3 > * use usleep_range instead of custom nsleep > * number change (07/16 -> 09/21) > > v0..v2 > * use device tree > * use devm helpers where possible > --- > .../devicetree/bindings/rtc/maxim-ds1302.txt | 46 +++
Acked-by: Rob Herring <[email protected]> > drivers/rtc/Kconfig | 15 +- > drivers/rtc/rtc-ds1302.c | 348 > ++++++++++----------- > 3 files changed, 212 insertions(+), 197 deletions(-) > create mode 100644 Documentation/devicetree/bindings/rtc/maxim-ds1302.txt
