On Fri, Feb 19, 2016 at 03:59:02PM -0500, Julien Grossholtz wrote:
> Add dts nodes for TS-4800 FPGA gpio chips.
> 
> Signed-off-by: Julien Grossholtz <[email protected]>
> ---
>  arch/arm/boot/dts/imx51-ts4800.dts | 29 +++++++++++++++++++++++++++++
>  1 file changed, 29 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx51-ts4800.dts 
> b/arch/arm/boot/dts/imx51-ts4800.dts
> index 0ff76a1..c72c944 100644
> --- a/arch/arm/boot/dts/imx51-ts4800.dts
> +++ b/arch/arm/boot/dts/imx51-ts4800.dts
> @@ -165,6 +165,35 @@
>                       reg = <0x12000 0x1000>;
>                       syscon = <&syscon 0x10 6>;
>               };
> +
> +             fpga_gpio0: fpga_gpio0@b0010020 {
> +                     compatible = "technologic,ts4800-gpio";

I do not understand how this works, considering this compatible is not
supported by kernel.

Shawn

> +                     reg = <0x10020 0x6>;
> +                     gpio-controller;
> +                     #gpio-cells = <2>;
> +             };
> +
> +             fpga_gpio1: fpga_gpio1@b0010028 {
> +                     compatible = "technologic,ts4800-gpio";
> +                     reg = <0x10028 0x6>;
> +                     gpio-controller;
> +                     #gpio-cells = <2>;
> +             };
> +
> +             fpga_gpio2: fpga_gpio2@b0010030 {
> +                     compatible = "technologic,ts4800-gpio";
> +                     reg = <0x10030 0x6>;
> +                     gpio-controller;
> +                     #gpio-cells = <2>;
> +             };
> +
> +             fpga_gpio3: fpga_gpio3@b0010038 {
> +                     compatible = "technologic,ts4800-gpio";
> +                     reg = <0x10038 0x6>;
> +                     gpio-controller;
> +                     ngpios = <8>;
> +                     #gpio-cells = <2>;
> +             };
>       };
>  };
>  
> -- 
> 2.5.0
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 

Reply via email to