Enable following configs for the Maxim Semiconductor's PMIC MAX77620/MAX20024. This is used on NVIDIA's Tegra 210 platform Jetson-TX1.
CONFIG_MFD_MAX77620 For MFD driver. CONFIG_PINCTRL_MAX77620 For pin control support CONFIG_GPIO_MAX77620 for GPIO Support. CONFIG_REGULATOR_MAX77620 for regulator support. CONFIG_RTC_DRV_MAX77686 for RTC support. Enable Tegra I2C config to enable I2C in NVIDIA's Tegra 210 platforms. Signed-off-by: Laxman Dewangan <ldewan...@nvidia.com> --- The patches for drivers of MFD/GPIO/Pincontrol are in flight. arch/arm64/configs/defconfig | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index a98a8ad..af3d4df 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -147,27 +147,32 @@ CONFIG_VIRTIO_CONSOLE=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_MV64XXX=y CONFIG_I2C_QUP=y +CONFIG_I2C_TEGRA=y CONFIG_I2C_UNIPHIER_F=y CONFIG_I2C_RCAR=y CONFIG_SPI=y CONFIG_SPI_PL022=y CONFIG_SPI_QUP=y CONFIG_SPMI=y +CONFIG_PINCTRL_MAX77620=y CONFIG_PINCTRL_MSM8916=y CONFIG_PINCTRL_QCOM_SPMI_PMIC=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_PL061=y CONFIG_GPIO_RCAR=y CONFIG_GPIO_XGENE=y +CONFIG_GPIO_MAX77620=y CONFIG_POWER_RESET_XGENE=y CONFIG_POWER_RESET_SYSCON=y # CONFIG_HWMON is not set +CONFIG_MFD_MAX77620=y CONFIG_MFD_SPMI_PMIC=y CONFIG_THERMAL=y CONFIG_THERMAL_EMULATION=y CONFIG_EXYNOS_THERMAL=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_MAX77620=y CONFIG_REGULATOR_QCOM_SMD_RPM=y CONFIG_REGULATOR_QCOM_SPMI=y CONFIG_FB=y @@ -216,6 +221,7 @@ CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_CPU=y CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_MAX77686=y CONFIG_RTC_DRV_EFI=y CONFIG_RTC_DRV_PL031=y CONFIG_RTC_DRV_SUN6I=y -- 2.1.4
