On Thu, 2007-01-04 at 20:07 +0100, Bartlomiej Zolnierkiewicz wrote: > On 1/4/07, Kasper Sandberg <[EMAIL PROTECTED]> wrote: > > Hello. > > > > i just attempted to test .20-rc3-git4 on a box, which has 6 drives in > > raid5. it uses raid autodetection, and 2 ide controllers (via and > > promise 20269). > > > > there are two problems. > > > > first, and most importantly, it doesent autodetect, i attempted with > > both the old ide drivers, and the new pata on libata drivers, the drives > > appears to be found, but the raid autoassembling just doesent happen. > > > > this is .17, which works: > > http://sh.nu/p/8001 > > > > this is .20-rc3-git4 which doesent work, in pata-on-libata mode: > > http://sh.nu/p/8000 > > > > this is .20-rc3-git4 which doesent work, in old ide mode: > > http://sh.nu/p/8002 > > For some reason IDE disk driver is not claiming IDE devices. > > Could you please double check that IDE disk driver is built-in > (CONFIG_BLK_DEV_IDEDISK=y in the kernel configuration) > and not compiled as module? i need not check even once, i do not have module support enabled, so everything 1000000% surely is built in. this is the case for .17 too (and earlier, this box was started with .15 i think.)
> > Bart > - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/