This patch fixes occasional tx buffer overflows in the i.MX serial
driver which came from the fact that space in the buffer was checked
after sending the first byte. Also, fifosize is 32 bytes, not 8.
Signed-off-by: Sascha Hauer <[EMAIL PROTECTED]
---
drivers/serial/imx.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
Index: linux-2.6.20-rc3/drivers/serial/imx.c
===================================================================
--- linux-2.6.20-rc3.orig/drivers/serial/imx.c
+++ linux-2.6.20-rc3/drivers/serial/imx.c
@@ -154,7 +154,7 @@ static inline void imx_transmit_buffer(s
{
struct circ_buf *xmit = &sport->port.info->xmit;
- do {
+ while (!(UTS((u32)sport->port.membase) & UTS_TXFULL)) {
/* send xmit->buf[xmit->tail]
* out the port here */
URTX0((u32)sport->port.membase) = xmit->buf[xmit->tail];
@@ -163,7 +163,7 @@ static inline void imx_transmit_buffer(s
sport->port.icount.tx++;
if (uart_circ_empty(xmit))
break;
- } while (!(UTS((u32)sport->port.membase) & UTS_TXFULL));
+ }
if (uart_circ_empty(xmit))
imx_stop_tx(&sport->port);
@@ -178,8 +178,7 @@ static void imx_start_tx(struct uart_por
UCR1((u32)sport->port.membase) |= UCR1_TXMPTYEN;
- if(UTS((u32)sport->port.membase) & UTS_TXEMPTY)
- imx_transmit_buffer(sport);
+ imx_transmit_buffer(sport);
}
static irqreturn_t imx_rtsint(int irq, void *dev_id)
@@ -678,7 +677,7 @@ static struct imx_port imx_ports[] = {
.mapbase = IMX_UART1_BASE, /* FIXME */
.irq = UART1_MINT_RX,
.uartclk = 16000000,
- .fifosize = 8,
+ .fifosize = 32,
.flags = UPF_BOOT_AUTOCONF,
.ops = &imx_pops,
.line = 0,
@@ -694,7 +693,7 @@ static struct imx_port imx_ports[] = {
.mapbase = IMX_UART2_BASE, /* FIXME */
.irq = UART2_MINT_RX,
.uartclk = 16000000,
- .fifosize = 8,
+ .fifosize = 32,
.flags = UPF_BOOT_AUTOCONF,
.ops = &imx_pops,
.line = 1,
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
