Patro, Sumant wrote:
Hello Randy,
At this time I am not trying to modify the function comment
style of existing megaraid_mbox code. For the new function the
description style is in sync with the preexisting code.
So, I request for the patch to be accepted in its current
submitted form.
I have no problem with that as long as you'll allow it to be
corrected to match kernel-doc syntax. Or don't use kernel-doc
syntax there at all.
Regards,
Sumant
-----Original Message-----
From: Randy Dunlap [mailto:[EMAIL PROTECTED]
Sent: Friday, January 05, 2007 1:35 PM
To: Patro, Sumant
Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED];
linux-scsi@vger.kernel.org; linux-kernel@vger.kernel.org; Kolli, Neela;
Yang, Bo; Patro, Sumant
Subject: Re: [PATCH] scsi: megaraid_{mm,mbox} init fix for kdump
On Fri, 05 Jan 2007 07:10:09 -0800 Sumant Patro wrote:
Hi,
---
Documentation/scsi/ChangeLog.megaraid | 16 ++
drivers/scsi/megaraid/megaraid_mbox.c | 140 +++++++++++++++++++-----
drivers/scsi/megaraid/megaraid_mbox.h | 4
3 files changed, 130 insertions(+), 30 deletions(-)
diff -uprN linux-2.6.orig/drivers/scsi/megaraid/megaraid_mbox.c
linux-2.6.new/drivers/scsi/megaraid/megaraid_mbox.c
--- linux-2.6.orig/drivers/scsi/megaraid/megaraid_mbox.c
2006-12-28 09:56:04.000000000 -0800
+++ linux-2.6.new/drivers/scsi/megaraid/megaraid_mbox.c
2007-01-04 11:22:21.000000000 -0800
@@ -3380,6 +3386,84 @@ megaraid_mbox_flush_cache(adapter_t *ada
/**
+ * megaraid_mbox_fire_sync_cmd - fire the sync cmd
+ * @param adapter : soft state for the controller
That (above) should just be:
* @adapter: (plus its description; the description there
doesn't seem to agree with its parameter name).
+ *
+ * Clears the pending cmds in FW and reinits its RAID structs */
+static int megaraid_mbox_fire_sync_cmd(adapter_t *adapter) {
+ mbox_t *mbox;
+ uint8_t raw_mbox[sizeof(mbox_t)];
+ mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter);
+ mbox64_t *mbox64;
+ int status = 0;
+ int i;
+ uint32_t dword;
+
+ mbox = (mbox_t *)raw_mbox;
+
+ memset((caddr_t)raw_mbox, 0, sizeof(mbox_t));
+
+ raw_mbox[0] = 0xFF;
+
+ mbox64 = raid_dev->mbox64;
+ mbox = raid_dev->mbox;
+
+ /* Wait until mailbox is free */
+ if (megaraid_busywait_mbox(raid_dev) != 0) {
+ status = 1;
+ goto blocked_mailbox;
+ }
+
+ /* Copy mailbox data into host structure */
+ memcpy((caddr_t)mbox, (caddr_t)raw_mbox, 16);
+ mbox->cmdid = 0xFE;
+ mbox->busy = 1;
+ mbox->poll = 0;
+ mbox->ack = 0;
+ mbox->numstatus = 0;
+ mbox->status = 0;
+
+ wmb();
+ WRINDOOR(raid_dev, raid_dev->mbox_dma | 0x1);
+
+ /* Wait for maximum 1 min for status to post.
+ * If the Firmware SUPPORTS the ABOVE COMMAND,
+ * mbox->cmd will be set to 0
+ * else
+ * the firmware will reject the command with
+ * mbox->numstatus set to 1
+ */
+
+ i = 0;
+ status = 0;
+ while (!mbox->numstatus && mbox->cmd == 0xFF) {
+ rmb();
+ msleep(1);
+ i++;
+ if (i > 1000 * 60) {
+ status = 1;
+ break;
+ }
+ }
+ if (mbox->numstatus == 1)
+ status = 1; /*cmd not supported*/
+
+ /* Check for interrupt line */
+ dword = RDOUTDOOR(raid_dev);
+ WROUTDOOR(raid_dev, dword);
+ WRINDOOR(raid_dev,2);
+
+ return status;
+
+blocked_mailbox:
+ con_log(CL_ANN, (KERN_WARNING "megaraid: blocked mailbox\n"));
+ return status;
+}
+
+/**
* megaraid_mbox_display_scb - display SCB information, mostly debug
purposes
* @param adapter : controllers' soft state
* @param scb : SCB to be displayed
I haven't looked at the entire source file, but these extra "param"
words should not be there. kernel-doc syntax is just
@name: description
---
~Randy
--
~Randy
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
