On 03/09/2016 01:35 PM, Eduardo Valentin wrote:
This changes the driver to use the devm_ version
of thermal_zone_of_sensor_register and cleans
up the  local points and unregister calls.

Cc: Jean Delvare <[email protected]>
Cc: Guenter Roeck <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Eduardo Valentin <[email protected]>

Acked-by: Guenter Roeck <[email protected]>

---
  drivers/hwmon/lm75.c | 10 +++-------
  1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index 0addc84..69166ab 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -77,7 +77,6 @@ static const u8 LM75_REG_TEMP[3] = {
  struct lm75_data {
        struct i2c_client       *client;
        struct device           *hwmon_dev;
-       struct thermal_zone_device      *tz;
        struct mutex            update_lock;
        u8                      orig_conf;
        u8                      resolution;     /* In bits, between 9 and 12 */
@@ -306,11 +305,9 @@ lm75_probe(struct i2c_client *client, const struct 
i2c_device_id *id)
        if (IS_ERR(data->hwmon_dev))
                return PTR_ERR(data->hwmon_dev);

-       data->tz = thermal_zone_of_sensor_register(data->hwmon_dev, 0,
-                                                  data->hwmon_dev,
-                                                  &lm75_of_thermal_ops);
-       if (IS_ERR(data->tz))
-               data->tz = NULL;
+       devm_thermal_zone_of_sensor_register(data->hwmon_dev, 0,
+                                            data->hwmon_dev,
+                                            &lm75_of_thermal_ops);

        dev_info(dev, "%s: sensor '%s'\n",
                 dev_name(data->hwmon_dev), client->name);
@@ -322,7 +319,6 @@ static int lm75_remove(struct i2c_client *client)
  {
        struct lm75_data *data = i2c_get_clientdata(client);

-       thermal_zone_of_sensor_unregister(data->hwmon_dev, data->tz);
        hwmon_device_unregister(data->hwmon_dev);
        lm75_write_value(client, LM75_REG_CONF, data->orig_conf);
        return 0;


Reply via email to