Hi,
On 16.03.2016 20:32, Grygorii Strashko wrote:
No-no :) take a look on i2c-omap.c
r = i2c_add_numbered_adapter(adap);
^^^^ here you see messages from tpa6130a2 (create i2c devices & probe if
drivers are ready)
if (r) {
dev_err(omap->dev, "failure adding adapter\n");
goto err_unuse_clocks;
}
dev_info(omap->dev, "bus %d rev%d.%d at %d kHz\n", adap->nr,
major, minor, omap->speed);
^^^^ and here "omap_i2c 48072000.i2c: bus 2 rev3.3 at 100 kHz"
so everything is ok with probe order
Sorry for the noise then :)
here is the log with dump_stack() in tpa6130a2_i2c_write:
Jan 1 06:01:43 Nokia-N900 kernel: [ 6.947998] omap_i2c 48070000.i2c: bus 1
rev3.3 at 2200 kHz
Jan 1 06:01:43 Nokia-N900 kernel: [ 6.960632] tpa6130a2 2-0060: Write failed
Jan 1 06:01:43 Nokia-N900 kernel: [ 6.965026] CPU: 0 PID: 6 Comm:
kworker/u2:0 Not tainted 4.5.0-rc5+ #26
Jan 1 06:01:43 Nokia-N900 kernel: [ 6.972106] Hardware name: Nokia RX-51
board
Jan 1 06:01:43 Nokia-N900 kernel: [ 6.976684] Workqueue: deferwq
deferred_probe_work_func
Jan 1 06:01:43 Nokia-N900 kernel: [ 6.982299] [<c0013c18>] (unwind_backtrace)
from [<c0011f38>] (show_stack+0x10/0x14)
Jan 1 06:01:43 Nokia-N900 kernel: [ 6.990570] [<c0011f38>] (show_stack) from
[<c0390884>] (tpa6130a2_i2c_write+0x58/0x90)
Jan 1 06:01:43 Nokia-N900 kernel: [ 6.999114] [<c0390884>] (tpa6130a2_i2c_write)
from [<c0390968>] (tpa6130a2_power+0xac/0x1c4)
Jan 1 06:01:43 Nokia-N900 kernel: [ 7.008239] [<c0390968>] (tpa6130a2_power) from
[<c0390d80>] (tpa6130a2_probe+0x144/0x234)
Jan 1 06:01:43 Nokia-N900 kernel: [ 7.017059] [<c0390d80>] (tpa6130a2_probe) from
[<c032b650>] (i2c_device_probe+0x170/0x1b8)
Jan 1 06:01:43 Nokia-N900 kernel: [ 7.025939] [<c032b650>] (i2c_device_probe)
from [<c02a7bd4>] (driver_probe_device+0x120/0x2b0)
Jan 1 06:01:43 Nokia-N900 kernel: [ 7.035247] [<c02a7bd4>] (driver_probe_device)
from [<c02a62c8>] (bus_for_each_drv+0x48/0x8c)
Jan 1 06:01:43 Nokia-N900 kernel: [ 7.044311] [<c02a62c8>] (bus_for_each_drv)
from [<c02a7a20>] (__device_attach+0x88/0xf8)
Jan 1 06:01:43 Nokia-N900 kernel: [ 7.053009] [<c02a7a20>] (__device_attach) from
[<c02a70b0>] (bus_probe_device+0x28/0x80)
Jan 1 06:01:43 Nokia-N900 kernel: [ 7.061737] [<c02a70b0>] (bus_probe_device)
from [<c02a5680>] (device_add+0x3c0/0x55c)
Jan 1 06:01:43 Nokia-N900 kernel: [ 7.070159] [<c02a5680>] (device_add) from
[<c032cf28>] (i2c_new_device+0xf8/0x198)
Jan 1 06:01:43 Nokia-N900 kernel: [ 7.078308] [<c032cf28>] (i2c_new_device) from
[<c032d4e8>] (i2c_register_adapter+0x2d0/0x47c)
Jan 1 06:01:43 Nokia-N900 kernel: [ 7.087432] [<c032d4e8>] (i2c_register_adapter)
from [<c032f084>] (omap_i2c_probe+0x54c/0x64c)
Jan 1 06:01:43 Nokia-N900 kernel: [ 7.096618] [<c032f084>] (omap_i2c_probe) from
[<c02a93bc>] (platform_drv_probe+0x58/0xa0)
Jan 1 06:01:43 Nokia-N900 kernel: [ 7.105438] [<c02a93bc>] (platform_drv_probe)
from [<c02a7bd4>] (driver_probe_device+0x120/0x2b0)
Jan 1 06:01:43 Nokia-N900 kernel: [ 7.114929] [<c02a7bd4>] (driver_probe_device)
from [<c02a62c8>] (bus_for_each_drv+0x48/0x8c)
Jan 1 06:01:43 Nokia-N900 kernel: [ 7.123962] [<c02a62c8>] (bus_for_each_drv)
from [<c02a7a20>] (__device_attach+0x88/0xf8)
Jan 1 06:01:43 Nokia-N900 kernel: [ 7.132659] [<c02a7a20>] (__device_attach) from
[<c02a70b0>] (bus_probe_device+0x28/0x80)
Jan 1 06:01:43 Nokia-N900 kernel: [ 7.141357] [<c02a70b0>] (bus_probe_device)
from [<c02a7508>] (deferred_probe_work_func+0x58/0x84)
Jan 1 06:01:43 Nokia-N900 kernel: [ 7.150939] [<c02a7508>]
(deferred_probe_work_func) from [<c0042a50>] (process_one_work+0x1c4/0x324)
Jan 1 06:01:43 Nokia-N900 kernel: [ 7.160705] [<c0042a50>] (process_one_work)
from [<c0042ef4>] (worker_thread+0x314/0x4a8)
Jan 1 06:01:43 Nokia-N900 kernel: [ 7.169433] [<c0042ef4>] (worker_thread) from
[<c00474e4>] (kthread+0xcc/0xe0)
Jan 1 06:01:43 Nokia-N900 kernel: [ 7.177154] [<c00474e4>] (kthread) from
[<c000f218>] (ret_from_fork+0x14/0x3c)
Jan 1 06:01:43 Nokia-N900 kernel: [ 7.184783] tpa6130a2 2-0060: Failed to
initialize chip
Jan 1 06:01:43 Nokia-N900 kernel: [ 7.190551] tpa6130a2: probe of 2-0060
failed with error -121
Jan 1 06:01:43 Nokia-N900 kernel: [ 7.197174] omap_i2c 48072000.i2c: bus 2
rev3.3 at 100 kHz
now, the only thing I can think of remaining to test is the reset gpio set-up -
I wonder if it is possible to be set in safe mode(or input, or... ?), so the
reset is never deasserted.
Ivo
