When tested the PHY SGMII Loopback,: 1.set the LOOPBACK bit, 2.set the autoneg to AUTONEG_DISABLE, it calls the genphy_setup_forced which will clear the bit.
So just keep the LOOPBACK bit while setup forced mode. Signed-off-by: Weidong Wang <wangweido...@huawei.com> --- drivers/net/phy/phy_device.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index e551f3a..8da4b80 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -1124,7 +1124,9 @@ static int genphy_config_advert(struct phy_device *phydev) int genphy_setup_forced(struct phy_device *phydev) { int ctl = 0; + int val = phy_read(phydev, MII_BMCR); + ctl |= val & BMCR_LOOPBACK; phydev->pause = 0; phydev->asym_pause = 0; -- 2.7.0