On Wednesday 30 March 2016 10:00:33 Roberto Fichera wrote:
> >
> > Check your XIO2001 routing and insure the following for proper IRQ mapping:
> > Slot12: IDSEL A28: socket INTA = XIO2001 INTA
> > Slot13: IDSEL A29: socket INTA = XIO2001 INTB
> > Slot14: IDSEL A30: socket INTA = XIO2001 INTC
> > Slot15: IDSEL A31: socket INTA = XIO2001 INTD
>
> After crosschecking with our hardware designer the PCB IRQ mapping is the
> following:
>
> J2 : IDSEL A16: => Device 0 : socket INTA = XIO2001 INTA
> J3 : IDSEL A18: => Device 2 : socket INTA = XIO2001 INTA* **(This should be
> INTC)*
> J11: IDSEL A20: => Device 4 : socket INTA = XIO2001 INTA
>
> The interrupt routing for J3 is wrong. The XIO2001 driver may expect Device 2
> to interrupt on INTC - but it will
> interrupt on INTA.
What does your interrupt-map property look like then? Note that you
have to override both map and map-mask in this case.
Arnd
