From: Rafael J. Wysocki <rafael.j.wyso...@intel.com>
There are multiple places in intel_pstate where int_tofp() is applied
to both arguments of div_fp(), but this is pointless, because int_tofp()
simply shifts its argument to the left by FRAC_BITS which mathematically
is equivalent to multuplication by 2^FRAC_BITS, so if this is done
to both arguments of a division, the extra factors will cancel each
other during that operation anyway.
Drop the pointless int_tofp() applied to div_fp() arguments throughout
the driver.
Signed-off-by: Rafael J. Wysocki <rafael.j.wyso...@intel.com>
---
drivers/cpufreq/intel_pstate.c | 27 +++++++++++----------------
1 file changed, 11 insertions(+), 16 deletions(-)
Index: linux-pm/drivers/cpufreq/intel_pstate.c
===================================================================
--- linux-pm.orig/drivers/cpufreq/intel_pstate.c
+++ linux-pm/drivers/cpufreq/intel_pstate.c
@@ -206,17 +206,17 @@ static inline void pid_reset(struct _pid
static inline void pid_p_gain_set(struct _pid *pid, int percent)
{
- pid->p_gain = div_fp(int_tofp(percent), int_tofp(100));
+ pid->p_gain = div_fp(percent, 100);
}
static inline void pid_i_gain_set(struct _pid *pid, int percent)
{
- pid->i_gain = div_fp(int_tofp(percent), int_tofp(100));
+ pid->i_gain = div_fp(percent, 100);
}
static inline void pid_d_gain_set(struct _pid *pid, int percent)
{
- pid->d_gain = div_fp(int_tofp(percent), int_tofp(100));
+ pid->d_gain = div_fp(percent, 100);
}
static signed int pid_calc(struct _pid *pid, int32_t busy)
@@ -394,7 +394,7 @@ static ssize_t show_turbo_pct(struct kob
total = cpu->pstate.turbo_pstate - cpu->pstate.min_pstate + 1;
no_turbo = cpu->pstate.max_pstate - cpu->pstate.min_pstate + 1;
- turbo_fp = div_fp(int_tofp(no_turbo), int_tofp(total));
+ turbo_fp = div_fp(no_turbo, total);
turbo_pct = 100 - fp_toint(mul_fp(turbo_fp, int_tofp(100)));
return sprintf(buf, "%u\n", turbo_pct);
}
@@ -465,8 +465,7 @@ static ssize_t store_max_perf_pct(struct
limits->max_perf_pct);
limits->max_perf_pct = max(limits->min_perf_pct,
limits->max_perf_pct);
- limits->max_perf = div_fp(int_tofp(limits->max_perf_pct),
- int_tofp(100));
+ limits->max_perf = div_fp(limits->max_perf_pct, 100);
if (hwp_active)
intel_pstate_hwp_set_online_cpus();
@@ -490,8 +489,7 @@ static ssize_t store_min_perf_pct(struct
limits->min_perf_pct);
limits->min_perf_pct = min(limits->max_perf_pct,
limits->min_perf_pct);
- limits->min_perf = div_fp(int_tofp(limits->min_perf_pct),
- int_tofp(100));
+ limits->min_perf = div_fp(limits->min_perf_pct, 100);
if (hwp_active)
intel_pstate_hwp_set_online_cpus();
@@ -973,8 +971,8 @@ static inline int32_t get_target_pstate_
* specified pstate.
*/
core_busy = cpu->sample.core_pct_busy;
- max_pstate = int_tofp(cpu->pstate.max_pstate_physical);
- current_pstate = int_tofp(cpu->pstate.current_pstate);
+ max_pstate = cpu->pstate.max_pstate_physical;
+ current_pstate = cpu->pstate.current_pstate;
core_busy = mul_fp(core_busy, div_fp(max_pstate, current_pstate));
/*
@@ -986,8 +984,7 @@ static inline int32_t get_target_pstate_
duration_ns = cpu->sample.time - cpu->last_sample_time;
if ((s64)duration_ns > pid_params.sample_rate_ns * 3
&& cpu->last_sample_time > 0) {
- sample_ratio = div_fp(int_tofp(pid_params.sample_rate_ns),
- int_tofp(duration_ns));
+ sample_ratio = div_fp(pid_params.sample_rate_ns, duration_ns);
core_busy = mul_fp(core_busy, sample_ratio);
}
@@ -1167,10 +1164,8 @@ static int intel_pstate_set_policy(struc
/* Make sure min_perf_pct <= max_perf_pct */
limits->min_perf_pct = min(limits->max_perf_pct, limits->min_perf_pct);
- limits->min_perf = div_fp(int_tofp(limits->min_perf_pct),
- int_tofp(100));
- limits->max_perf = div_fp(int_tofp(limits->max_perf_pct),
- int_tofp(100));
+ limits->min_perf = div_fp(limits->min_perf_pct, 100);
+ limits->max_perf = div_fp(limits->max_perf_pct, 100);
out:
intel_pstate_set_update_util_hook(policy->cpu);
