Hi Elaine,
Am Freitag, 1. April 2016, 10:33:45 schrieb Elaine Zhang:
> I agree with most of your modifications.
> Except, the u32 *qos_save_regs below
you're right. I didn't take that into account when my open-coding my idea.
A bit more below:
> On 04/01/2016 12:31 AM, Heiko Stuebner wrote:
> > Hi Elaine,
> >
> > Am Freitag, 18. März 2016, 15:17:24 schrieb Elaine Zhang:
> >> support qos save and restore when power domain on/off.
> >>
> >> Signed-off-by: Elaine Zhang <zhangq...@rock-chips.com>
> >
> > overall looks nice already ... some implementation-specific comments
> > below.>
> >> ---
> >>
> >> drivers/soc/rockchip/pm_domains.c | 87
> >>
> >> +++++++++++++++++++++++++++++++++++++-- 1 file changed, 84
> >> insertions(+),
> >> 3 deletions(-)
> >>
> >> diff --git a/drivers/soc/rockchip/pm_domains.c
> >> b/drivers/soc/rockchip/pm_domains.c index 18aee6b..c5f4be6 100644
> >> --- a/drivers/soc/rockchip/pm_domains.c
> >> +++ b/drivers/soc/rockchip/pm_domains.c
> >> @@ -45,10 +45,21 @@ struct rockchip_pmu_info {
> >>
> >> const struct rockchip_domain_info *domain_info;
> >>
> >> };
> >>
> >> +#define MAX_QOS_NODE_NUM 20
> >> +#define MAX_QOS_REGS_NUM 5
> >> +#define QOS_PRIORITY 0x08
> >> +#define QOS_MODE 0x0c
> >> +#define QOS_BANDWIDTH 0x10
> >> +#define QOS_SATURATION 0x14
> >> +#define QOS_EXTCONTROL 0x18
> >> +
> >>
> >> struct rockchip_pm_domain {
> >>
> >> struct generic_pm_domain genpd;
> >> const struct rockchip_domain_info *info;
> >> struct rockchip_pmu *pmu;
> >>
> >> + int num_qos;
> >> + struct regmap *qos_regmap[MAX_QOS_NODE_NUM];
> >> + u32 qos_save_regs[MAX_QOS_NODE_NUM][MAX_QOS_REGS_NUM];
> >
> > struct regmap **qos_regmap;
> > u32 *qos_save_regs;
>
> when we save and restore qos registers we need save five regs for every
> qos. like this :
> for (i = 0; i < pd->num_qos; i++) {
> regmap_read(pd->qos_regmap[i],
> QOS_PRIORITY,
> &pd->qos_save_regs[i][0]);
> regmap_read(pd->qos_regmap[i],
> QOS_MODE,
> &pd->qos_save_regs[i][1]);
> regmap_read(pd->qos_regmap[i],
> QOS_BANDWIDTH,
> &pd->qos_save_regs[i][2]);
> regmap_read(pd->qos_regmap[i],
> QOS_SATURATION,
> &pd->qos_save_regs[i][3]);
> regmap_read(pd->qos_regmap[i],
> QOS_EXTCONTROL,
> &pd->qos_save_regs[i][4]);
> }
> so we can not define qos_save_regs like u32 *qos_save_regs;,
> and apply buff like
> pd->qos_save_regs = kcalloc(pd->num_qos * MAX_QOS_REGS_NUM, sizeof(u32),
> GFP_KERNEL);
so how about simply swapping indices and doing it like
u32 *qos_save_regs[MAX_QOS_REGS_NUM];
for (i = 0; i < MAX_QOS_REGS_NUM; i++) {
qos_save_regs[i] = kcalloc(pd->num_qos, sizeof(u32));
/* error handling here */
}
...
regmap_read(pd->qos_regmap[i],
QOS_SATURATION,
&pd->qos_save_regs[3][i]);
...
Asked the other way around, how did you measure to set MAX_QOS_REGS_NUM to
20? From looking at the rk3399 TRM, it seems there are only 38 QoS
generators on the SoC in general (24 on the rk3288 with PD_VIO having a
maximum of 9 qos generators), so preparing for 20 seems a bit overkill ;-)
Heiko
