Hi, On Thu, Mar 31, 2016 at 10:42:31AM +0800, YH Huang wrote: > On Wed, 2016-03-30 at 17:09 +0200, Sebastian Reichel wrote: > > Hi, > > > > On Wed, Mar 30, 2016 at 04:58:30PM +0800, YH Huang wrote: > > > If I revise the description in this way(using your clear explanation): > > > ------------------------------------------------------------------------ > > > The battery capacity changing course is like this: > > > > > > full: BATTERY_FULLY_CHARGED => POWER_SUPPLY_STATUS_FULL > > > <unplug AC> > > > high->low: BATTERY_DISCHARGING => POWER_SUPPLY_STATUS_DISCHARGING > > > ~0%: DISCHARGING & FULLY_DISCHARGED => POWER_SUPPLY_STATUS_NOT_CHARGING > > > <plug in AC> > > > 0%~20%: FULLY_DISCHARGED => POWER_SUPPLY_STATUS_CHARGING > > > 20%~: No flag => POWER_SUPPLY_STATUS_CHARGING > > > > > > For now, it is not exactly right to show the status as > > > POWER_SUPPLY_STATUS_NOT_CHARGING when the battery is dry > > > (FULLY_DISCHARGED) and AC is plugged in. > > > Although the battery is in a low level, system works fine with the AC > > > charging. > > > It is better to say that the battery is charging. > > > ------------------------------------------------------------------------ > > > > > > How about this? > > > By the way, should I also revise the title? > > > > POWER_SUPPLY_STATUS_NOT_CHARGING is used for AC connected, but > > battery not charging (e.g. because battery temperature is out > > of acceptable range). If you are discharging use > > POWER_SUPPLY_STATUS_DISCHARGING. > > > > You should just ignore the FULLY_DISCHARGED bit in the status > > property. If you don't want to loose the information about fully > > discharged battery add POWER_SUPPLY_PROP_CAPACITY_LEVEL, which maps: > > > > BATTERY_FULLY_CHARGED => POWER_SUPPLY_CAPACITY_LEVEL_FULL > > FULLY_DISCHARGED => POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL > > otherwise => POWER_SUPPLY_CAPACITY_LEVEL_NORMAL > > Oops. > It looks like I misunderstand POWER_SUPPLY_STATUS_NOT_CHARGING. > As Daniel said before, we could just ignore FULLY_DISCHARGED. > > So change like the > > sbs-battery: fix power status when battery charging near > dry > > POWER_SUPPLY_STATUS_NOT_CHARGING is used for AC connected, but > battery not charging (e.g. because battery temperature is out > of acceptable range). > > When battery is charging near dry and BATTERY_FULL_DISCHARGED is set, > it is wrong to set as POWER_SUPPLY_STATUS_NOT_CHARGING. > Just use BATTERY_DISCHARGING to decide the power supply status is > discharging or charging. > > if (ret & BATTERY_FULL_CHARGED) > val->intval = POWER_SUPPLY_STATUS_FULL; > - else if (ret & BATTERY_FULL_DISCHARGED) > - val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; > else if (ret & BATTERY_DISCHARGING) > val->intval = POWER_SUPPLY_STATUS_DISCHARGING; >
Yes, that looks fine. Can you send this correctly formated for git? -- Sebastian
signature.asc
Description: PGP signature