[PATCH] sis5513: sis5513_config_xfer_rate() cleanup

* remove bogus comment for sis5513_config_xfer_rate()
* there is no need to call config_drive_art_rwp() because
  it is called by config_art_rwp_pio()
* remove needless wrapper
* remove stale "TODO" comment
  (IDE core should provide generic tuning code)

Signed-off-by: Bartlomiej Zolnierkiewicz <[EMAIL PROTECTED]>

---
 drivers/ide/pci/sis5513.c |   41 +++--------------------------------------
 1 file changed, 3 insertions(+), 38 deletions(-)

Index: a/drivers/ide/pci/sis5513.c
===================================================================
--- a.orig/drivers/ide/pci/sis5513.c
+++ a/drivers/ide/pci/sis5513.c
@@ -667,11 +667,13 @@ static int config_chipset_for_dma (ide_d
        return ide_dma_enable(drive);
 }
 
-static int sis5513_config_drive_xfer_rate (ide_drive_t *drive)
+static int sis5513_config_xfer_rate(ide_drive_t *drive)
 {
        ide_hwif_t *hwif        = HWIF(drive);
        struct hd_driveid *id   = drive->id;
 
+       config_art_rwp_pio(drive, 5);
+
        drive->init_speed = 0;
 
        if (id && (id->capability & 1) && drive->autodma) {
@@ -692,43 +694,6 @@ fast_ata_pio:
        return 0;
 }
 
-/* initiates/aborts (U)DMA read/write operations on a drive. */
-static int sis5513_config_xfer_rate (ide_drive_t *drive)
-{
-       config_drive_art_rwp(drive);
-       config_art_rwp_pio(drive, 5);
-       return sis5513_config_drive_xfer_rate(drive);
-}
-
-/*
-  Future simpler config_xfer_rate :
-   When ide_find_best_mode is made bad-drive aware
-   - remove config_drive_xfer_rate and config_chipset_for_dma,
-   - replace config_xfer_rate with the following
-
-static int sis5513_config_xfer_rate (ide_drive_t *drive)
-{
-       u16 w80 = HWIF(drive)->udma_four;
-       u16 speed;
-
-       config_drive_art_rwp(drive);
-       config_art_rwp_pio(drive, 5);
-
-       speed = ide_find_best_mode(drive,
-               XFER_PIO | XFER_EPIO | XFER_SWDMA | XFER_MWDMA |
-               (chipset_family >= ATA_33 ? XFER_UDMA : 0) |
-               (w80 && chipset_family >= ATA_66 ? XFER_UDMA_66 : 0) |
-               (w80 && chipset_family >= ATA_100a ? XFER_UDMA_100 : 0) |
-               (w80 && chipset_family >= ATA_133a ? XFER_UDMA_133 : 0));
-
-       sis5513_tune_chipset(drive, speed);
-
-       if (drive->autodma && (speed & XFER_MODE) != XFER_PIO)
-               return HWIF(drive)->ide_dma_on(drive);
-       return HWIF(drive)->ide_dma_off_quietly(drive);
-}
-*/
-
 /* Chip detection and general config */
 static unsigned int __devinit init_chipset_sis5513 (struct pci_dev *dev, const 
char *name)
 {
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to