On Sun, Jan 14, 2007 at 10:08:37AM +0100, Prakash Punnoor wrote: > Am Donnerstag 11 Januar 2007 18:28 schrieb Oliver Neukum: > > Am Donnerstag, 11. Januar 2007 18:20 schrieb Prakash Punnoor: > > > Hi, > > > > > > I can't scan anymore. :-( I don't know which rc kernel introduced it, but > > > this are the messages I get (w/o touching the device/usb cable except > > > pluggin it in for the first time): > > > > > > usb 1-1.2: new full speed USB device using ehci_hcd and address 4 > > > ehci_hcd 0000:00:0b.1: qh ffff81007bc6c280 (#00) state 4 > > > usb 1-1.2: configuration #1 chosen from 1 choice > > > usb 1-1.2: USB disconnect, address 4 > > > usb 1-1.2: new full speed USB device using ehci_hcd and address 5 > > > usb 1-1.2: configuration #1 chosen from 1 choice > > > usb 1-1.2: USB disconnect, address 5 > > > usb 1-1.2: new full speed USB device using ehci_hcd and address 6 > > > usb 1-1.2: configuration #1 chosen from 1 choice > > > usb 1-1.2: USB disconnect, address 6 > > > usb 1-1.2: new full speed USB device using ehci_hcd and address 7 > > > usb 1-1.2: configuration #1 chosen from 1 choice > > > usb 1-1.2: USB disconnect, address 7 > > > usb 1-1.2: new full speed USB device using ehci_hcd and address 8 > > > usb 1-1.2: configuration #1 chosen from 1 choice > > > > > > > > > Shouldn't the ohci module handle the scanner? The scanner is connected > > > through a hub. > > > > Therefore it goes to EHCI. Can you try a direct connection? > > > > > I don't remember how 2.6.19 handled it, or whether I used some new exotic > > > setting which causes the breakage. > > > > Could you try 2.6.19? > > > > > Well, I'll test this week-end and upload more infos then. If you already > > > have some ideas in the meantime, let me know. > > > > Please test with CONFIG_USB_DEBUG > > > Hi, I did more tests and I was wrong about "broken". It seems more a time-out > problem, ie if I try to use sane again in short intervalls, I will get my > device working. The cause seems CONFIG_USB_SUSPEND=y. With 2.6.20-rc5 the > situation seems better, ie now I don't get "no device" very less often. >...
FYI, we already have a report of a different CONFIG_USB_SUSPEND regression in 2.6.20-rc: Subject : 'shutdown -h now' reboots the system (CONFIG_USB_SUSPEND) References : http://lkml.org/lkml/2006/12/25/40 Submitter : Berthold Cogel <[EMAIL PROTECTED]> Handled-By : Alexey Starikovskiy <[EMAIL PROTECTED]> Status : problem is being debugged cu Adrian -- "Is there not promise of rain?" Ling Tan asked suddenly out of the darkness. There had been need of rain for many days. "Only a promise," Lao Er said. Pearl S. Buck - Dragon Seed - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
