[PATCH v2 02/13] ARM: dts: apq8064: add support to gsbi1 uart

[Srinivas Kandagatla]

This patch adds support to gsbi1 uart and its pinctrls nodes.

Signed-off-by: Srinivas Kandagatla <srinivas.kandaga...@linaro.org>
---
 arch/arm/boot/dts/qcom-apq8064-pins.dtsi | 14 ++++++++++++++
 arch/arm/boot/dts/qcom-apq8064.dtsi      | 10 ++++++++++
 2 files changed, 24 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi 
b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
index b57c59d..8bb5e5f 100644
--- a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
@@ -39,6 +39,20 @@
                };
        };
 
+       gsbi1_uart_2pins: gsbi1_uart_2pins {
+               mux {
+                       pins = "gpio18", "gpio19";
+                       function = "gsbi1";
+               };
+       };
+
+       gsbi1_uart_4pins: gsbi1_uart_4pins {
+               mux {
+                       pins = "gpio18", "gpio19", "gpio20", "gpio21";
+                       function = "gsbi1";
+               };
+       };
+
        i2c2_pins: i2c2 {
                mux {
                        pins = "gpio24", "gpio25";
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi 
b/arch/arm/boot/dts/qcom-apq8064.dtsi
index c6ff8fc..81b4290 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -225,6 +225,16 @@
 
                        syscon-tcsr = <&tcsr>;
 
+                       gsbi1_serial: serial@12450000 {
+                               compatible = "qcom,msm-uartdm-v1.3", 
"qcom,msm-uartdm";
+                               reg = <0x12450000 0x100>,
+                                     <0x12400000 0x03>;
+                               interrupts = <0 193 0x0>;
+                               clocks = <&gcc GSBI1_UART_CLK>, <&gcc 
GSBI1_H_CLK>;
+                               clock-names = "core", "iface";
+                               status = "disabled";
+                       };
+
                        gsbi1_i2c: i2c@12460000 {
                                compatible = "qcom,i2c-qup-v1.1.1";
                                pinctrl-0 = <&i2c1_pins>;
-- 
2.5.0