On Mon, Jan 15, 2007 at 08:32:17PM +0000, David Hollis wrote: > Interesting. It would really be something if your devices happen to > work better with 0. Wouldn't make much sense at all unfortunately. If > 0 works, could you also try setting it to 2 or 3? The PHY select value > is a bit field with the 0 bit being to select the onboard PHY, and 1 bit > being to 'auto-select' the PHY based on link status. The data sheet > indicates that 3 should be the default, but all of the literature I have > seen from ASIX says to write a 1 to it.
My hardware is ver. B1. 0, 2, and 3 all worked for me. 1, as before, does not. 'rmmod asix' takes a really long time (45-80s) with any setting, and sometimes coincides with ksoftirqd pegging (99.9% CPU) for several seconds. -Eric - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/