It's desirable to specify which LEDs are to be blinked on a kernel
panic. Therefore, introduce a devicetree boolean property to mark
which LEDs should be treated this way, if possible.
Signed-off-by: Ezequiel Garcia <ezequ...@vanguardiasur.com.ar>
---
Documentation/devicetree/bindings/leds/common.txt | 3 +++
1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/leds/common.txt
b/Documentation/devicetree/bindings/leds/common.txt
index 68419843e32f..7b646a7808ce 100644
--- a/Documentation/devicetree/bindings/leds/common.txt
+++ b/Documentation/devicetree/bindings/leds/common.txt
@@ -37,6 +37,9 @@ Optional properties for child nodes:
property is mandatory for the LEDs in the non-flash modes
(e.g. torch or indicator).
+- panic-indicator : This properties specifies that the LED should be used,
+ if at all possible, as a panic indicator.
+
Required properties for flash LED child nodes:
- flash-max-microamp : Maximum flash LED supply current in microamperes.
- flash-max-timeout-us : Maximum timeout in microseconds after which the flash
--
2.7.0
