[PATCH 3/3] phy: rockchip-emmc: adapt binding to specifiy register offset and length

[Kishon Vijay Abraham I]

From: Heiko Stuebner <he...@sntech.de>

The emmc-phy occupies a contiguous set of 8 registers inside the general
register files, so the reg property should specify this.

Signed-off-by: Heiko Stuebner <he...@sntech.de>
Acked-by: Rob Herring <r...@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kis...@ti.com>
---
 .../devicetree/bindings/phy/rockchip-emmc-phy.txt  |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt 
b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
index 461e958..555cb0f 100644
--- a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
+++ b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
@@ -4,7 +4,7 @@ Rockchip EMMC PHY
 Required properties:
  - compatible: rockchip,rk3399-emmc-phy
  - #phy-cells: must be 0
- - reg: PHY configure reg address offset in "general
+ - reg: PHY register address offset and length in "general
    register files"
 
 Example:
@@ -12,12 +12,14 @@ Example:
 
 grf: syscon@ff770000 {
        compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
+       #address-cells = <1>;
+       #size-cells = <1>;
 
 ...
 
        emmcphy: phy@f780 {
                compatible = "rockchip,rk3399-emmc-phy";
-               reg = <0xf780>;
+               reg = <0xf780 0x20>;
                #phy-cells = <0>;
        };
 };
-- 
1.7.9.5