From: Mathias Nyman <[email protected]> 3.4.112-rc1 review patch. If anyone has any objections, please let me know.
------------------ commit dca7794539eff04b786fb6907186989e5eaaa9c2 upstream. Some changes between xhci 0.96 and xhci 1.0 specifications forced us to check the hci version in code, some of these checks were implemented as hci_version == 1.0, which will not work with new xhci 1.1 controllers. xhci 1.1 behaves similar to xhci 1.0 in these cases, so change these checks to hci_version >= 1.0 Signed-off-by: Mathias Nyman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Zefan Li <[email protected]> --- drivers/usb/host/xhci-mem.c | 6 +++--- drivers/usb/host/xhci-ring.c | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 048cc38..cad4a174 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1493,10 +1493,10 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, * use Event Data TRBs, and we don't chain in a link TRB on short * transfers, we're basically dividing by 1. * - * xHCI 1.0 specification indicates that the Average TRB Length should - * be set to 8 for control endpoints. + * xHCI 1.0 and 1.1 specification indicates that the Average TRB Length + * should be set to 8 for control endpoints. */ - if (usb_endpoint_xfer_control(&ep->desc) && xhci->hci_version == 0x100) + if (usb_endpoint_xfer_control(&ep->desc) && xhci->hci_version >= 0x100) ep_ctx->tx_info |= cpu_to_le32(AVG_TRB_LENGTH_FOR_EP(8)); else ep_ctx->tx_info |= diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 3cfe7e3..02c6dc8 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -3496,8 +3496,8 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, if (start_cycle == 0) field |= 0x1; - /* xHCI 1.0 6.4.1.2.1: Transfer Type field */ - if (xhci->hci_version == 0x100) { + /* xHCI 1.0/1.1 6.4.1.2.1: Transfer Type field */ + if (xhci->hci_version >= 0x100) { if (urb->transfer_buffer_length > 0) { if (setup->bRequestType & USB_DIR_IN) field |= TRB_TX_TYPE(TRB_DATA_IN); -- 1.9.1
