The RTC RV3029 handles different types of alarms : seconds, minutes, ... These alarms can be enabled or disabled individually using an AE_x bit which is the last bit (BIT(7)) on each alarm registers.
To prepare the alarm IRQ support, the current code enables all the alarm types by setting each AE_x to 1. It also fixes month and weekday errors : it was performing -1 instead of +1. Signed-off-by: Mylène Josserand <[email protected]> --- drivers/rtc/rtc-rv3029c2.c | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-) diff --git a/drivers/rtc/rtc-rv3029c2.c b/drivers/rtc/rtc-rv3029c2.c index a849005..42de1a3 100644 --- a/drivers/rtc/rtc-rv3029c2.c +++ b/drivers/rtc/rtc-rv3029c2.c @@ -76,6 +76,7 @@ #define RV3029_A_DW 0x14 #define RV3029_A_MO 0x15 #define RV3029_A_YR 0x16 +#define RV3029_A_AE_X BIT(7) #define RV3029_ALARM_SECTION_LEN 0x07 /* timer section */ @@ -436,14 +437,22 @@ static int rv3029_set_alarm(struct device *dev, struct rtc_wkalrm *alarm) dev_err(dev, "%s: reading SR failed\n", __func__); return -EIO; } - regs[RV3029_A_SC - RV3029_A_SC] = bin2bcd(tm->tm_sec & 0x7f); - regs[RV3029_A_MN - RV3029_A_SC] = bin2bcd(tm->tm_min & 0x7f); - regs[RV3029_A_HR - RV3029_A_SC] = bin2bcd(tm->tm_hour & 0x3f); - regs[RV3029_A_DT - RV3029_A_SC] = bin2bcd(tm->tm_mday & 0x3f); - regs[RV3029_A_MO - RV3029_A_SC] = bin2bcd((tm->tm_mon & 0x1f) - 1); - regs[RV3029_A_DW - RV3029_A_SC] = bin2bcd((tm->tm_wday & 7) - 1); - regs[RV3029_A_YR - RV3029_A_SC] = bin2bcd((tm->tm_year & 0x7f) - 100); + /* Activate all the alarms with AE_x bit */ + regs[RV3029_A_SC - RV3029_A_SC] = (bin2bcd(tm->tm_sec)) | RV3029_A_AE_X; + regs[RV3029_A_MN - RV3029_A_SC] = (bin2bcd(tm->tm_min)) | RV3029_A_AE_X; + regs[RV3029_A_HR - RV3029_A_SC] = (bin2bcd(tm->tm_hour & 0x3f)) + | RV3029_A_AE_X; + regs[RV3029_A_DT - RV3029_A_SC] = (bin2bcd(tm->tm_mday & 0x3f)) + | RV3029_A_AE_X; + regs[RV3029_A_MO - RV3029_A_SC] = (bin2bcd((tm->tm_mon & 0x1f) + 1)) + | RV3029_A_AE_X; + regs[RV3029_A_DW - RV3029_A_SC] = (bin2bcd((tm->tm_wday & 7) + 1)) + | RV3029_A_AE_X; + regs[RV3029_A_YR - RV3029_A_SC] = (bin2bcd((tm->tm_year) - 100)) + | RV3029_A_AE_X; + + /* Write the alarm */ ret = rv3029_write_regs(dev, RV3029_A_SC, regs, RV3029_ALARM_SECTION_LEN); if (ret < 0) -- 2.8.0.rc3
