Sorry for starting a new thread, but I've deleted the messages from my
mail-box, and I'm sot sure it's the same problem as here:
http://lkml.org/lkml/2007/1/14/108
Today I've decided to try XFS... and just doing anything on it
(extracting a tarball, for example) make my SATA HD go crazy ;)
I don't remember to have seen this using Ext3.
[ 877.839920] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x2 frozen
[ 877.839929] ata1.00: cmd 61/02:00:64:98:98/00:00:00:00:00/40 tag 0 cdb 0x0
data 1024 out
[ 877.839931] res 40/00:00:00:4f:c2/00:00:00:4f:c2/00 Emask 0x4
(timeout)
[ 878.142367] ata1: soft resetting port
[ 878.351791] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 878.354384] ata1.00: configured for UDMA/133
[ 878.354392] ata1: EH complete
[ 878.355696] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[ 878.355716] sda: Write Protect is off
[ 878.355718] sda: Mode Sense: 00 3a 00 00
[ 878.355745] SCSI device sda: write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
It takes nothing to reproduce it.
My hardware is:
00:00.0 Host bridge: Intel Corporation 82P965/G965 Memory Controller Hub (rev
02)
00:02.0 VGA compatible controller: Intel Corporation 82G965 Integrated Graphics
Controller (rev 02)
00:03.0 Communication controller: Intel Corporation 82P965/G965 HECI Controller
(rev 02)
00:19.0 Ethernet controller: Intel Corporation 82566DC Gigabit Network
Connection (rev 02)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #4 (rev
02)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #5 (rev
02)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #2
(rev 02)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio
Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1
(rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2
(rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3
(rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4
(rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5
(rev 02)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #1 (rev
02)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #2 (rev
02)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #3 (rev
02)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #1
(rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface
Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801HB (ICH8) 4 port SATA AHCI
Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
02:00.0 IDE interface: Marvell Technology Group Ltd. Unknown device 6101 (rev
b1)
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
with a Seagate Barracurda 7200rpm 80GB HD
I've so far tested these kernels:
2.6.20-rc5 BAD
2.6.20-rc4 BAD
2.6.19 BAD
2.6.18 BAD
2.6.17 Good !
I'll start a git-bisection...
--
Paolo Ornati
Linux 2.6.20-rc5 on x86_64
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
