On Sun, Apr 24, 2016 at 10:49:02PM +0200, Noralf Trønnes wrote:
> Use the fbdev deferred io support in drm_fb_helper.
> The (struct fb_ops *)->fb_{fillrect,copyarea,imageblit} functions will
> now schedule a worker instead of being flushed directly like it was
> previously (recorded when in atomic).
> 
> This patch has only been compile tested.
> 
> Signed-off-by: Noralf Trønnes <nor...@tronnes.org>
> ---
> 
> Changes since v1:
> - No need to enable deferred_io by default since drm_fb_helper uses
>   a dedicated worker for flushing

Hooray for deleting code. Reviewed-by: Daniel Vetter <daniel.vet...@ffwll.ch>

> 
>  drivers/gpu/drm/udl/udl_drv.h |   2 -
>  drivers/gpu/drm/udl/udl_fb.c  | 140 
> ++----------------------------------------
>  2 files changed, 6 insertions(+), 136 deletions(-)
> 
> diff --git a/drivers/gpu/drm/udl/udl_drv.h b/drivers/gpu/drm/udl/udl_drv.h
> index 4a064ef..0b03d34 100644
> --- a/drivers/gpu/drm/udl/udl_drv.h
> +++ b/drivers/gpu/drm/udl/udl_drv.h
> @@ -81,8 +81,6 @@ struct udl_framebuffer {
>       struct drm_framebuffer base;
>       struct udl_gem_object *obj;
>       bool active_16; /* active on the 16-bit channel */
> -     int x1, y1, x2, y2; /* dirty rect */
> -     spinlock_t dirty_lock;
>  };
> 
>  #define to_udl_fb(x) container_of(x, struct udl_framebuffer, base)
> diff --git a/drivers/gpu/drm/udl/udl_fb.c b/drivers/gpu/drm/udl/udl_fb.c
> index a52de2f..4a9b432 100644
> --- a/drivers/gpu/drm/udl/udl_fb.c
> +++ b/drivers/gpu/drm/udl/udl_fb.c
> @@ -77,68 +77,6 @@ static uint16_t rgb16(uint32_t col)
>  }
>  #endif
> 
> -/*
> - * NOTE: fb_defio.c is holding info->fbdefio.mutex
> - *   Touching ANY framebuffer memory that triggers a page fault
> - *   in fb_defio will cause a deadlock, when it also tries to
> - *   grab the same mutex.
> - */
> -static void udlfb_dpy_deferred_io(struct fb_info *info,
> -                               struct list_head *pagelist)
> -{
> -     struct page *cur;
> -     struct fb_deferred_io *fbdefio = info->fbdefio;
> -     struct udl_fbdev *ufbdev = info->par;
> -     struct drm_device *dev = ufbdev->ufb.base.dev;
> -     struct udl_device *udl = dev->dev_private;
> -     struct urb *urb;
> -     char *cmd;
> -     cycles_t start_cycles, end_cycles;
> -     int bytes_sent = 0;
> -     int bytes_identical = 0;
> -     int bytes_rendered = 0;
> -
> -     if (!fb_defio)
> -             return;
> -
> -     start_cycles = get_cycles();
> -
> -     urb = udl_get_urb(dev);
> -     if (!urb)
> -             return;
> -
> -     cmd = urb->transfer_buffer;
> -
> -     /* walk the written page list and render each to device */
> -     list_for_each_entry(cur, &fbdefio->pagelist, lru) {
> -
> -             if (udl_render_hline(dev, (ufbdev->ufb.base.bits_per_pixel / 8),
> -                                  &urb, (char *) info->fix.smem_start,
> -                                  &cmd, cur->index << PAGE_SHIFT,
> -                                  cur->index << PAGE_SHIFT,
> -                                  PAGE_SIZE, &bytes_identical, &bytes_sent))
> -                     goto error;
> -             bytes_rendered += PAGE_SIZE;
> -     }
> -
> -     if (cmd > (char *) urb->transfer_buffer) {
> -             /* Send partial buffer remaining before exiting */
> -             int len = cmd - (char *) urb->transfer_buffer;
> -             udl_submit_urb(dev, urb, len);
> -             bytes_sent += len;
> -     } else
> -             udl_urb_completion(urb);
> -
> -error:
> -     atomic_add(bytes_sent, &udl->bytes_sent);
> -     atomic_add(bytes_identical, &udl->bytes_identical);
> -     atomic_add(bytes_rendered, &udl->bytes_rendered);
> -     end_cycles = get_cycles();
> -     atomic_add(((unsigned int) ((end_cycles - start_cycles)
> -                 >> 10)), /* Kcycles */
> -                &udl->cpu_kcycles_used);
> -}
> -
>  int udl_handle_damage(struct udl_framebuffer *fb, int x, int y,
>                     int width, int height)
>  {
> @@ -152,9 +90,6 @@ int udl_handle_damage(struct udl_framebuffer *fb, int x, 
> int y,
>       struct urb *urb;
>       int aligned_x;
>       int bpp = (fb->base.bits_per_pixel / 8);
> -     int x2, y2;
> -     bool store_for_later = false;
> -     unsigned long flags;
> 
>       if (!fb->active_16)
>               return 0;
> @@ -180,38 +115,6 @@ int udl_handle_damage(struct udl_framebuffer *fb, int x, 
> int y,
>           (y + height > fb->base.height))
>               return -EINVAL;
> 
> -     /* if we are in atomic just store the info
> -        can't test inside spin lock */
> -     if (in_atomic())
> -             store_for_later = true;
> -
> -     x2 = x + width - 1;
> -     y2 = y + height - 1;
> -
> -     spin_lock_irqsave(&fb->dirty_lock, flags);
> -
> -     if (fb->y1 < y)
> -             y = fb->y1;
> -     if (fb->y2 > y2)
> -             y2 = fb->y2;
> -     if (fb->x1 < x)
> -             x = fb->x1;
> -     if (fb->x2 > x2)
> -             x2 = fb->x2;
> -
> -     if (store_for_later) {
> -             fb->x1 = x;
> -             fb->x2 = x2;
> -             fb->y1 = y;
> -             fb->y2 = y2;
> -             spin_unlock_irqrestore(&fb->dirty_lock, flags);
> -             return 0;
> -     }
> -
> -     fb->x1 = fb->y1 = INT_MAX;
> -     fb->x2 = fb->y2 = 0;
> -
> -     spin_unlock_irqrestore(&fb->dirty_lock, flags);
>       start_cycles = get_cycles();
> 
>       urb = udl_get_urb(dev);
> @@ -219,14 +122,14 @@ int udl_handle_damage(struct udl_framebuffer *fb, int 
> x, int y,
>               return 0;
>       cmd = urb->transfer_buffer;
> 
> -     for (i = y; i <= y2 ; i++) {
> +     for (i = y; i < height ; i++) {
>               const int line_offset = fb->base.pitches[0] * i;
>               const int byte_offset = line_offset + (x * bpp);
>               const int dev_byte_offset = (fb->base.width * bpp * i) + (x * 
> bpp);
>               if (udl_render_hline(dev, bpp, &urb,
>                                    (char *) fb->obj->vmapping,
>                                    &cmd, byte_offset, dev_byte_offset,
> -                                  (x2 - x + 1) * bpp,
> +                                  width * bpp,
>                                    &bytes_identical, &bytes_sent))
>                       goto error;
>       }
> @@ -283,36 +186,6 @@ static int udl_fb_mmap(struct fb_info *info, struct 
> vm_area_struct *vma)
>       return 0;
>  }
> 
> -static void udl_fb_fillrect(struct fb_info *info, const struct fb_fillrect 
> *rect)
> -{
> -     struct udl_fbdev *ufbdev = info->par;
> -
> -     sys_fillrect(info, rect);
> -
> -     udl_handle_damage(&ufbdev->ufb, rect->dx, rect->dy, rect->width,
> -                       rect->height);
> -}
> -
> -static void udl_fb_copyarea(struct fb_info *info, const struct fb_copyarea 
> *region)
> -{
> -     struct udl_fbdev *ufbdev = info->par;
> -
> -     sys_copyarea(info, region);
> -
> -     udl_handle_damage(&ufbdev->ufb, region->dx, region->dy, region->width,
> -                       region->height);
> -}
> -
> -static void udl_fb_imageblit(struct fb_info *info, const struct fb_image 
> *image)
> -{
> -     struct udl_fbdev *ufbdev = info->par;
> -
> -     sys_imageblit(info, image);
> -
> -     udl_handle_damage(&ufbdev->ufb, image->dx, image->dy, image->width,
> -                       image->height);
> -}
> -
>  /*
>   * It's common for several clients to have framebuffer open simultaneously.
>   * e.g. both fbcon and X. Makes things interesting.
> @@ -339,7 +212,7 @@ static int udl_fb_open(struct fb_info *info, int user)
> 
>               if (fbdefio) {
>                       fbdefio->delay = DL_DEFIO_WRITE_DELAY;
> -                     fbdefio->deferred_io = udlfb_dpy_deferred_io;
> +                     fbdefio->deferred_io = drm_fb_helper_deferred_io;
>               }
> 
>               info->fbdefio = fbdefio;
> @@ -379,9 +252,9 @@ static struct fb_ops udlfb_ops = {
>       .owner = THIS_MODULE,
>       .fb_check_var = drm_fb_helper_check_var,
>       .fb_set_par = drm_fb_helper_set_par,
> -     .fb_fillrect = udl_fb_fillrect,
> -     .fb_copyarea = udl_fb_copyarea,
> -     .fb_imageblit = udl_fb_imageblit,
> +     .fb_fillrect = drm_fb_helper_sys_fillrect,
> +     .fb_copyarea = drm_fb_helper_sys_copyarea,
> +     .fb_imageblit = drm_fb_helper_sys_imageblit,
>       .fb_pan_display = drm_fb_helper_pan_display,
>       .fb_blank = drm_fb_helper_blank,
>       .fb_setcmap = drm_fb_helper_setcmap,
> @@ -458,7 +331,6 @@ udl_framebuffer_init(struct drm_device *dev,
>  {
>       int ret;
> 
> -     spin_lock_init(&ufb->dirty_lock);
>       ufb->obj = obj;
>       drm_helper_mode_fill_fb_struct(&ufb->base, mode_cmd);
>       ret = drm_framebuffer_init(dev, &ufb->base, &udlfb_funcs);
> --
> 2.2.2
> 

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch

Reply via email to