After removing all uses of the range operations in a recent patch, we get a warning about the symbol not being referenced anywhere:
drivers/regulator/rk808-regulator.c:306:29: 'rk808_reg_ops_ranges' defined but not used This removes the now-unused structure along with the rk808_set_suspend_voltage_range function that is only referenced from rk808_reg_ops_ranges. Signed-off-by: Arnd Bergmann <[email protected]> Fixes: afcd666d9db0 ("regulator: rk808: remove linear range definitions with a single range") --- drivers/regulator/rk808-regulator.c | 28 ---------------------------- 1 file changed, 28 deletions(-) diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c index 964b95eed271..67f72feed815 100644 --- a/drivers/regulator/rk808-regulator.c +++ b/drivers/regulator/rk808-regulator.c @@ -238,21 +238,6 @@ static int rk808_set_suspend_voltage(struct regulator_dev *rdev, int uv) sel); } -static int rk808_set_suspend_voltage_range(struct regulator_dev *rdev, int uv) -{ - unsigned int reg; - int sel = regulator_map_voltage_linear_range(rdev, uv, uv); - - if (sel < 0) - return -EINVAL; - - reg = rdev->desc->vsel_reg + RK808_SLP_REG_OFFSET; - - return regmap_update_bits(rdev->regmap, reg, - rdev->desc->vsel_mask, - sel); -} - static int rk808_set_suspend_enable(struct regulator_dev *rdev) { unsigned int reg; @@ -303,19 +288,6 @@ static struct regulator_ops rk808_reg_ops = { .set_suspend_disable = rk808_set_suspend_disable, }; -static struct regulator_ops rk808_reg_ops_ranges = { - .list_voltage = regulator_list_voltage_linear_range, - .map_voltage = regulator_map_voltage_linear_range, - .get_voltage_sel = regulator_get_voltage_sel_regmap, - .set_voltage_sel = regulator_set_voltage_sel_regmap, - .enable = regulator_enable_regmap, - .disable = regulator_disable_regmap, - .is_enabled = regulator_is_enabled_regmap, - .set_suspend_voltage = rk808_set_suspend_voltage_range, - .set_suspend_enable = rk808_set_suspend_enable, - .set_suspend_disable = rk808_set_suspend_disable, -}; - static struct regulator_ops rk808_switch_ops = { .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, -- 2.7.0
