On 1/22/07, Stefan Priebe - FH <[EMAIL PROTECTED]> wrote:
I've an Asus A8V Mainboard which works wonderful with a 2.6.18.X kernel. But i cannot use the SATA Controller with a 2.6.19.x Kernel.
I also have an Asus A8V motherboard that cannot boot a newer kernel because the SATA controller does not come up properly. I have tried kernels 2.6.19.2 and 2.6.20-rc5 with no luck. It looks like later kernels don't recognize the proper IRQ of the device as compared to the 2.6.18 boot logs.
"ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 21" "ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE mode" "ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part " "ata1: SATA max UDMA/133 cmd 0xFFFFC20000004D00 ctl 0x0 bmdma 0x0 irq 1277" "ata2: SATA max UDMA/133 cmd 0xFFFFC20000004D80 ctl 0x0 bmdma 0x0 irq 1277" "ata3: SATA max UDMA/133 cmd 0xFFFFC20000004E00 ctl 0x0 bmdma 0x0 irq 1277" "ata4: SATA max UDMA/133 cmd 0xFFFFC20000004E80 ctl 0x0 bmdma 0x0 irq 1277"
Similar output as above. Does any one have any ideas? Stephen - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/