On Mon, Apr 25, 2016 at 12:52:45PM -0500, ttha...@opensource.altera.com wrote: > From: Thor Thayer <ttha...@opensource.altera.com> > > Add the device tree bindings needed to support the Altera Ethernet > FIFO buffers on the Arria10 chip. > > Signed-off-by: Thor Thayer <ttha...@opensource.altera.com> > --- > v2 No Change > --- > .../bindings/arm/altera/socfpga-eccmgr.txt | 24 > ++++++++++++++++++++ > 1 file changed, 24 insertions(+) > > diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt > b/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt > index 5a6b160..aa1c593 100644 > --- a/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt > +++ b/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt > @@ -76,6 +76,18 @@ Required Properties: > - compatible : Should be "altr,socfpga-a10-ocram-ecc" > - reg : Address and size for ECC block registers. > > +Ethernet FIFO ECC > +Required Properties: > +- compatible : Should be "altr,socfpga-a10-emac0-rx-ecc" for the 1st EMAC > + Receive buffer > + or "altr,socfpga-a10-emac0-tx-ecc" for the 1st EMAC Transmit buffer > + or "altr,socfpga-a10-emac1-rx-ecc" for the 2nd EMAC Receive buffer > + or "altr,socfpga-a10-emac1-tx-ecc" for the 2nd EMAC Transmit buffer > + or "altr,socfpga-a10-emac2-rx-ecc" for the 3rd EMAC Receive buffer > + or "altr,socfpga-a10-emac2-tx-ecc" for the 3rd EMAC Transmit buffer
These blocks don't really appear to be different other than the interrupt mask (which is in another block?). I think they should be the same compatible with a property for the interrupt (perhaps a full interrupt-controller binding). > +- reg : Address and size for ECC block registers. > +- parent : phandle to parent Ethernet node. Needs a better name and altr prefix. Maybe altr,eth-mac? Rob