From: Patrice Chotard <[email protected]> In order to prepare the ground to STMPE1600, as STMPE1600's SYS_CTRL register has the same layout as STMPE801 variant, unify STMPExxx_REG_SYS_CTRL_RESET/INT_EN/INT_HI bit masks to more generic STMPE_SYS_CTRL_RESET/INT_EN/INT_HI
Signed-off-by: Patrice Chotard <[email protected]> --- drivers/mfd/stmpe.c | 4 ++-- drivers/mfd/stmpe.h | 6 ++---- 2 files changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c index af682d0..2556463 100644 --- a/drivers/mfd/stmpe.c +++ b/drivers/mfd/stmpe.c @@ -1089,7 +1089,7 @@ static int stmpe_chip_init(struct stmpe *stmpe) if (stmpe->irq >= 0) { if (id == STMPE801_ID) - icr = STMPE801_REG_SYS_CTRL_INT_EN; + icr = STMPE_SYS_CTRL_INT_EN; else icr = STMPE_ICR_LSB_GIM; @@ -1103,7 +1103,7 @@ static int stmpe_chip_init(struct stmpe *stmpe) if (irq_trigger == IRQF_TRIGGER_RISING || irq_trigger == IRQF_TRIGGER_HIGH) { if (id == STMPE801_ID) - icr |= STMPE801_REG_SYS_CTRL_INT_HI; + icr |= STMPE_SYS_CTRL_INT_HI; else icr |= STMPE_ICR_LSB_HIGH; } diff --git a/drivers/mfd/stmpe.h b/drivers/mfd/stmpe.h index 4ae343d..4ba1123 100644 --- a/drivers/mfd/stmpe.h +++ b/drivers/mfd/stmpe.h @@ -105,6 +105,8 @@ int stmpe_remove(struct stmpe *stmpe); #define STMPE_ICR_LSB_GIM (1 << 0) #define STMPE_SYS_CTRL_RESET (1 << 7) +#define STMPE_SYS_CTRL_INT_EN (1 << 2) +#define STMPE_SYS_CTRL_INT_HI (1 << 0) /* * STMPE801 @@ -121,10 +123,6 @@ int stmpe_remove(struct stmpe *stmpe); #define STMPE801_REG_GPIO_SET_PIN 0x11 #define STMPE801_REG_GPIO_DIR 0x12 -#define STMPE801_REG_SYS_CTRL_RESET (1 << 7) -#define STMPE801_REG_SYS_CTRL_INT_EN (1 << 2) -#define STMPE801_REG_SYS_CTRL_INT_HI (1 << 0) - /* * STMPE811 */ -- 1.9.1
