[PATCH] ARM: dts: imx6: apalis: parallel lcd display support on ixora

[Marcel Ziswiler]

Add parallel LCD display support for the EDT ET057090DHU 5.7" LCD TFT
panel.

Signed-off-by: Marcel Ziswiler <marcel.ziswi...@toradex.com>
---

 arch/arm/boot/dts/imx6q-apalis-ixora.dts | 45 ++++++++++++++++++++++++++++++++
 1 file changed, 45 insertions(+)

diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts 
b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
index 4b533cb..8e67ca2 100644
--- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts
+++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
@@ -80,6 +80,47 @@
                };
        };
 
+       lcd_display: display@di0 {
+               compatible = "fsl,imx-parallel-display";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               interface-pix-fmt = "rgb24";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_ipu1_lcdif>;
+               status = "okay";
+
+               port@0 {
+                       reg = <0>;
+
+                       lcd_display_in: endpoint {
+                               remote-endpoint = <&ipu1_di0_disp1>;
+                       };
+               };
+
+               port@1 {
+                       reg = <1>;
+
+                       lcd_display_out: endpoint {
+                               remote-endpoint = <&lcd_panel_in>;
+                       };
+               };
+       };
+
+       panel: panel {
+               /*
+                * edt,et057090dhu: EDT 5.7" LCD TFT
+                * edt,et070080dh6: EDT 7.0" LCD TFT
+                */
+               compatible = "edt,et057090dhu";
+               backlight = <&backlight>;
+
+               port {
+                       lcd_panel_in: endpoint {
+                               remote-endpoint = <&lcd_display_out>;
+                       };
+               };
+       };
+
        leds {
                compatible = "gpio-leds";
 
@@ -169,6 +210,10 @@
        };
 };
 
+&ipu1_di0_disp1 {
+       remote-endpoint = <&lcd_display_in>;
+};
+
 &ldb {
        status = "okay";
 };
-- 
2.5.5