On Tue, 23 Jan 2007, Tejun Heo wrote: > Henrique de Moraes Holschuh wrote: > > Does SATA electrical conector keying let the disk firmware unload > > heads before the user manages to pull it out enough to sever power? > > I don't think so.
Heh, thought as much. (Good) SCSI hotswap bays notice you pulled the disk release lever and issue an START_STOP_UNIT by themselves to the disk well before you have time to start pulling the disk out. I wonder if the SATA ones do (I kind of doubt that, SATA seems to attract the el-cheapo, el-crapo crowd of manufacturers). > > If it does not, the drive will do an emergency head unload, which is > > not good and will likely reduce the drive's lifetime. > > Probably. So, that means it should be explained in the docs that you are to stop the disk first, if you can. > > Using hdparm -Y before the unplug, or scsiadd -r (on a kernel that > > has Tejun's new patch to optionally issue an START_STOP_UNIT to the > > SCSI device enabled) is probably a good idea. Unless it is a shared > > SATA port (I don't know if such a thing exists yet) and another box > > is talking to the disk, etc. > > Agreed. But it would be *much* better if all these can be taken care of > by hald and its minions. Such that the user can just tell the system > that the hdd is going to be removed and all these dirty tricks are done > automagically. Even if hald does this automatically, it would still be a very good idea to document the proper sequence, IMO... -- "One disk to rule them all, One disk to find them. One disk to bring them all and in the darkness grind them. In the Land of Redmond where the shadows lie." -- The Silicon Valley Tarot Henrique Holschuh - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/