On Tue, 23 Jan 2007 10:30:27 +0900 (JST)
Atsushi Nemoto <[EMAIL PROTECTED]> wrote:
> Subject: [PATCH] Make CARDBUS_MEM_SIZE and CARDBUS_IO_SIZE customizable
>
> CARDBUS_MEM_SIZE was increased to 64MB on 2.6.20-rc2, but larger size
> might result in allocation failure for the reserving itself on some
> platforms (for example typical 32bit MIPS). Make it (and
> CARDBUS_IO_SIZE too) customizable by "pci=" option for such platforms.
>
> ...
>
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -1168,6 +1168,12 @@ static int __devinit pci_setup(char *str
> if (*str && (str = pcibios_setup(str)) && *str) {
> if (!strcmp(str, "nomsi")) {
> pci_no_msi();
> + } else if (!strncmp(str, "cbiosize=", 9)) {
> + pci_cardbus_io_size =
> + memparse(str + 9, &str);
> + } else if (!strncmp(str, "cbmemsize=", 10)) {
> + pci_cardbus_mem_size =
> + memparse(str + 10, &str);
> } else {
> printk(KERN_ERR "PCI: Unknown option `%s'\n",
> str);
> diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
> index 89f3036..1dfc288 100644
> --- a/drivers/pci/setup-bus.c
> +++ b/drivers/pci/setup-bus.c
> @@ -40,8 +40,11 @@ #define ROUND_UP(x, a) (((x) + (a) - 1)
> * FIXME: IO should be max 256 bytes. However, since we may
> * have a P2P bridge below a cardbus bridge, we need 4K.
> */
> -#define CARDBUS_IO_SIZE (256)
> -#define CARDBUS_MEM_SIZE (64*1024*1024)
> +#define DEFAULT_CARDBUS_IO_SIZE (256)
> +#define DEFAULT_CARDBUS_MEM_SIZE (64*1024*1024)
> +/* pci=cbmemsize=nnM,cbiosize=nn can override this */
> +unsigned long pci_cardbus_io_size = DEFAULT_CARDBUS_IO_SIZE;
> +unsigned long pci_cardbus_mem_size = DEFAULT_CARDBUS_MEM_SIZE;
setup-bus.o is linked only on x86, so your patch will cause all other
pci-using architectures to not link.
An easy fix is to move the definitions of pci_cardbus_io_size and
pci_cardbus_mem_size into pci.c. An ugly, fragile but more efficient fix
is, reluctantly:
diff -puN
drivers/pci/pci.c~make-cardbus_mem_size-and-cardbus_io_size-boot-options-fix
drivers/pci/pci.c
---
a/drivers/pci/pci.c~make-cardbus_mem_size-and-cardbus_io_size-boot-options-fix
+++ a/drivers/pci/pci.c
@@ -1212,13 +1212,15 @@ static int __devinit pci_setup(char *str
if (*str && (str = pcibios_setup(str)) && *str) {
if (!strcmp(str, "nomsi")) {
pci_no_msi();
- } else if (!strncmp(str, "cbiosize=", 9)) {
- pci_cardbus_io_size =
- memparse(str + 9, &str);
+ }
+#ifdef CONFIG_X86
+ else if (!strncmp(str, "cbiosize=", 9)) {
+ pci_cardbus_io_size = memparse(str + 9, &str);
} else if (!strncmp(str, "cbmemsize=", 10)) {
- pci_cardbus_mem_size =
- memparse(str + 10, &str);
- } else {
+ pci_cardbus_mem_size = memparse(str + 10, &str);
+ }
+#endif
+ else {
printk(KERN_ERR "PCI: Unknown option `%s'\n",
str);
}
diff -puN
drivers/pci/setup-bus.c~make-cardbus_mem_size-and-cardbus_io_size-boot-options-fix
drivers/pci/setup-bus.c
---
a/drivers/pci/setup-bus.c~make-cardbus_mem_size-and-cardbus_io_size-boot-options-fix
+++ a/drivers/pci/setup-bus.c
@@ -36,10 +36,6 @@
#define ROUND_UP(x, a) (((x) + (a) - 1) & ~((a) - 1))
-/*
- * FIXME: IO should be max 256 bytes. However, since we may
- * have a P2P bridge below a cardbus bridge, we need 4K.
- */
#define DEFAULT_CARDBUS_IO_SIZE (256)
#define DEFAULT_CARDBUS_MEM_SIZE (64*1024*1024)
/* pci=cbmemsize=nnM,cbiosize=nn can override this */
_
Perhaps we should move the cbiosize= and cbmemsize= handlers over into
setup-bus.c. The implementation would be cleaner, but then we wouldn't be
able to use the pci= namespace.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
