On Tue, May 03, 2016 at 08:07:41PM +0800, Caesar Wang wrote:
> See the thermal code, the obvious typo from my editor.
It looks like whitespace changes, not typos. Please be specific.
>
> Signed-off-by: Caesar Wang <w...@rock-chips.com>
> ---
>
> Documentation/devicetree/bindings/thermal/thermal.txt | 10 +++++-----
> drivers/thermal/thermal_core.c | 2 +-
> 2 files changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/thermal/thermal.txt
> b/Documentation/devicetree/bindings/thermal/thermal.txt
> index 41b817f..88b6ea1 100644
> --- a/Documentation/devicetree/bindings/thermal/thermal.txt
> +++ b/Documentation/devicetree/bindings/thermal/thermal.txt
> @@ -62,7 +62,7 @@ For more examples of cooling devices, refer to the example
> sections below.
> Required properties:
> - #cooling-cells: Used to provide cooling device specific information
> Type: unsigned while referring to it. Must be at least 2, in order
> - Size: one cell to specify minimum and maximum cooling state
> used
> + Size: one cell to specify minimum and maximum cooling state used
> in the reference. The first cell is the minimum
> cooling state requested and the second cell is
> the maximum cooling state requested in the reference.
> @@ -119,7 +119,7 @@ Required properties:
> Optional property:
> - contribution: The cooling contribution to the thermal zone of
> the
> Type: unsigned referred cooling device at the referred trip point.
> - Size: one cell The contribution is a ratio of the sum
> + Size: one cell The contribution is a ratio of the sum
> of all cooling contributions within a thermal zone.
>
> Note: Using the THERMAL_NO_LIMIT (-1UL) constant in the cooling-device
> phandle
> @@ -145,7 +145,7 @@ Required properties:
> Size: one cell
>
> - thermal-sensors: A list of thermal sensor phandles and sensor specifier
> - Type: list of used while monitoring the thermal zone.
> + Type: list of used while monitoring the thermal zone.
> phandles + sensor
> specifier
>
> @@ -473,7 +473,7 @@ thermal-zones {
> <&adc>; /* pcb north */
>
> /* hotspot = 100 * bandgap - 120 * adc + 484 */
> - coefficients = <100 -120 484>;
> + coefficients = <100 -120 484>;
>
> trips {
> ...
> @@ -502,7 +502,7 @@ from the ADC sensor. The binding would be then:
> thermal-sensors = <&adc>;
>
> /* hotspot = 1 * adc + 6000 */
> - coefficients = <1 6000>;
> + coefficients = <1 6000>;
>
> (d) - Board thermal
>
> diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
> index e5bfbd3..26870ef 100644
> --- a/drivers/thermal/thermal_core.c
> +++ b/drivers/thermal/thermal_core.c
> @@ -513,7 +513,7 @@ int thermal_zone_get_temp(struct thermal_zone_device *tz,
> int *temp)
> if (!ret && *temp < crit_temp)
> *temp = tz->emul_temperature;
> }
> -
> +
> mutex_unlock(&tz->lock);
> exit:
> return ret;
> --
> 1.9.1
>
