When creat an ip6gretap interface with an unreachable route,
the MTU is about 14 bytes larger than what was needed.
If the remote address is reachable:
ping6 2001:0:130::1 -c 2
PING 2001:0:130::1(2001:0:130::1) 56 data bytes
64 bytes from 2001:0:130::1: icmp_seq=1 ttl=64 time=1.46 ms
64 bytes from 2001:0:130::1: icmp_seq=2 ttl=64 time=81.1 ms
--- 2001:0:130::1 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 1001ms
rtt min/avg/max/mdev = 1.465/41.316/81.167/39.851 ms
ip link add ip6gretap1 type ip6gretap\
local 2001:0:130::2 remote 2001:0:130::1
ip link show ip6gretap1
11: ip6gretap1@NONE: <BROADCAST,MULTICAST> mtu 1434 ...
link/ether c2:f3:f8:c1:2c:bf brd ff:ff:ff:ff:ff:ff
The MTU value 1434 is right. But if we delete the direct route:
ip -6 route del 2001:0:130::/64
ping6 2001:0:130::1 -c 2
connect: Network is unreachable
ip link add ip6gretap1 type ip6gretap\
local 2001:0:130::2 remote 2001:0:130::1
ip link show ip6gretap1
12: ip6gretap1@NONE: <BROADCAST,MULTICAST> mtu 1448 ...
link/ether 7e:e1:d2:c4:06:5e brd ff:ff:ff:ff:ff:ff
Now, the MTU value 1448 is larger than what was needed.
This patch fix the issue in this situation.
Signed-off-by: Haishuang Yan <yanhaishu...@cmss.chinamobile.com>
---
net/ipv6/ip6_gre.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/net/ipv6/ip6_gre.c b/net/ipv6/ip6_gre.c
index 4541fa5..8ea5a4d 100644
--- a/net/ipv6/ip6_gre.c
+++ b/net/ipv6/ip6_gre.c
@@ -1029,6 +1029,8 @@ static int ip6gre_tunnel_init_common(struct net_device
*dev)
dev->hard_header_len = LL_MAX_HEADER + t_hlen;
dev->mtu = ETH_DATA_LEN - t_hlen;
+ if (dev->type == ARPHRD_ETHER)
+ dev->mtu -= ETH_HLEN;
if (!(tunnel->parms.flags & IP6_TNL_F_IGN_ENCAP_LIMIT))
dev->mtu -= 8;
--
1.8.3.1
