[PATCH] Input: pwm-beeper - fix: scheduling while atomic

[Manfred Schlaegl]

Pwm config may sleep so defer it using a worker.

Trigger:
On a Freescale i.MX53 based board we ran into "BUG: scheduling while
atomic" because input_inject_event locks interrupts, but
imx_pwm_config_v2 sleeps.

Tested on Freescale i.MX53 SoC with 4.6.0 and 4.1.24.

Unmodified applicable to
 * 4.6    (stable)
 * 4.5.4  (stable)
 * 4.4.10 (longterm)
 * 4.1.24 (longterm)

Modified applicable to
 * 3.18.33 (longterm)

Signed-off-by: Manfred Schlaegl <manfred.schla...@gmx.at>
---
 drivers/input/misc/pwm-beeper.c | 54 +++++++++++++++++++++++++++--------------
 1 file changed, 36 insertions(+), 18 deletions(-)

diff --git a/drivers/input/misc/pwm-beeper.c b/drivers/input/misc/pwm-beeper.c
index f2261ab..7d783c8 100644
--- a/drivers/input/misc/pwm-beeper.c
+++ b/drivers/input/misc/pwm-beeper.c
@@ -20,21 +20,41 @@
 #include <linux/platform_device.h>
 #include <linux/pwm.h>
 #include <linux/slab.h>
+#include <linux/workqueue.h>
 
 struct pwm_beeper {
        struct input_dev *input;
        struct pwm_device *pwm;
+       struct work_struct work;
        unsigned long period;
 };
 
 #define HZ_TO_NANOSECONDS(x) (1000000000UL/(x))
 
+static void __pwm_beeper_set(struct pwm_beeper *beeper)
+{
+       unsigned long period = beeper->period;
+
+       pwm_config(beeper->pwm, period / 2, period);
+
+       if (period == 0)
+               pwm_disable(beeper->pwm);
+       else
+               pwm_enable(beeper->pwm);
+}
+
+static void pwm_beeper_work(struct work_struct *work)
+{
+       struct pwm_beeper *beeper =
+               container_of(work, struct pwm_beeper, work);
+
+       __pwm_beeper_set(beeper);
+}
+
 static int pwm_beeper_event(struct input_dev *input,
                            unsigned int type, unsigned int code, int value)
 {
-       int ret = 0;
        struct pwm_beeper *beeper = input_get_drvdata(input);
-       unsigned long period;
 
        if (type != EV_SND || value < 0)
                return -EINVAL;
@@ -49,18 +69,12 @@ static int pwm_beeper_event(struct input_dev *input,
                return -EINVAL;
        }
 
-       if (value == 0) {
-               pwm_disable(beeper->pwm);
-       } else {
-               period = HZ_TO_NANOSECONDS(value);
-               ret = pwm_config(beeper->pwm, period / 2, period);
-               if (ret)
-                       return ret;
-               ret = pwm_enable(beeper->pwm);
-               if (ret)
-                       return ret;
-               beeper->period = period;
-       }
+       if (value == 0)
+               beeper->period = 0;
+       else
+               beeper->period = HZ_TO_NANOSECONDS(value);
+
+       schedule_work(&beeper->work);
 
        return 0;
 }
@@ -87,6 +101,8 @@ static int pwm_beeper_probe(struct platform_device *pdev)
                goto err_free;
        }
 
+       INIT_WORK(&beeper->work, pwm_beeper_work);
+
        beeper->input = input_allocate_device();
        if (!beeper->input) {
                dev_err(&pdev->dev, "Failed to allocate input device\n");
@@ -133,6 +149,8 @@ static int pwm_beeper_remove(struct platform_device *pdev)
 {
        struct pwm_beeper *beeper = platform_get_drvdata(pdev);
 
+       cancel_work_sync(&beeper->work);
+
        input_unregister_device(beeper->input);
 
        pwm_disable(beeper->pwm);
@@ -147,6 +165,8 @@ static int __maybe_unused pwm_beeper_suspend(struct device 
*dev)
 {
        struct pwm_beeper *beeper = dev_get_drvdata(dev);
 
+       cancel_work_sync(&beeper->work);
+
        if (beeper->period)
                pwm_disable(beeper->pwm);
 
@@ -157,10 +177,8 @@ static int __maybe_unused pwm_beeper_resume(struct device 
*dev)
 {
        struct pwm_beeper *beeper = dev_get_drvdata(dev);
 
-       if (beeper->period) {
-               pwm_config(beeper->pwm, beeper->period / 2, beeper->period);
-               pwm_enable(beeper->pwm);
-       }
+       if (beeper->period)
+               __pwm_beeper_set(beeper);
 
        return 0;
 }
-- 
2.1.4