Adding DT binding doc for extcon gpio device
properties.
Signed-off-by: Venkat Reddy Talla <vreddyta...@nvidia.com>
---
changes in v2:
- added description for extcon-gpio
- using gpio flag cell to handle gpio active state
- change dts property name gpio to gpios
- removed prefix for debounce
- added description for extcon-gpio,cable-names
---
---
.../devicetree/bindings/extcon/extcon-gpio.txt | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
create mode 100644 Documentation/devicetree/bindings/extcon/extcon-gpio.txt
diff --git a/Documentation/devicetree/bindings/extcon/extcon-gpio.txt
b/Documentation/devicetree/bindings/extcon/extcon-gpio.txt
new file mode 100644
index 0000000..2302960
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/extcon-gpio.txt
@@ -0,0 +1,22 @@
+EXTCON FOR GPIO
+
+extcon-gpio responsible to detect external cable state when
+attached or detached.
+
+Required Properties:
+ - compatible : Should be "extcon-gpio";
+
+Optional Properties:
+ - extcon-gpio,name: Name of extcon device.
+ - gpios: gpio number.
+ - extcon-gpio,irq-flags: IRQ flags for gpio.
+ - debounce-ms: Debounce time in ms.
+ - extcon-gpio,cable-names: The unique id of specific external connector
+ defined in include/linux/extcon.h
+
+extcon-gpio {
+ compatible = "extcon-gpio";
+ extcon-gpio,name = "VBUS";
+ gpios = <&gpio 20 0>;
+ extcon-gpio,cable-names = <EXTCON_USB EXTCON_NONE>;
+};
--
2.1.4
