McBSP2/3 module's sidetone module operates using the module's ICLK clock. When the Sidetone is in use the interface clock of the module must not idle. The new callback expects to receive the *clk of the module's ick and not the id number of the McBSP. This will allow us more cleanups and going to simplify the ICLK handling.
Signed-off-by: Peter Ujfalusi <peter.ujfal...@ti.com> --- arch/arm/mach-omap2/mcbsp.c | 12 ++++++++++++ include/linux/platform_data/asoc-ti-mcbsp.h | 1 + 2 files changed, 13 insertions(+) diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index b4ac3af1160c..959cb4cb1062 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -48,6 +48,17 @@ static int omap3_enable_st_clock(unsigned int id, bool enable) return omap2_clk_allow_idle(mcbsp_iclks[id]); } +static int omap3_mcbsp_force_ick_on(struct clk *clk, bool force_on) +{ + if (!clk) + return 0; + + if (force_on) + return omap2_clk_deny_idle(clk); + else + return omap2_clk_allow_idle(clk); +} + static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused) { int id, count = 1; @@ -97,6 +108,7 @@ static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused) oh_device[1] = omap_hwmod_lookup(( (struct omap_mcbsp_dev_attr *)(oh->dev_attr))->sidetone); pdata->enable_st_clock = omap3_enable_st_clock; + pdata->force_ick_on = omap3_mcbsp_force_ick_on; sprintf(clk_name, "mcbsp%d_ick", id); mcbsp_iclks[id] = clk_get(NULL, clk_name); count++; diff --git a/include/linux/platform_data/asoc-ti-mcbsp.h b/include/linux/platform_data/asoc-ti-mcbsp.h index 3c73c045f8da..73e5e832fa23 100644 --- a/include/linux/platform_data/asoc-ti-mcbsp.h +++ b/include/linux/platform_data/asoc-ti-mcbsp.h @@ -45,6 +45,7 @@ struct omap_mcbsp_platform_data { bool has_wakeup; /* Wakeup capability */ bool has_ccr; /* Transceiver has configuration control registers */ int (*enable_st_clock)(unsigned int, bool); + int (*force_ick_on)(struct clk *clk, bool force_on); }; /** -- 2.8.3