[PATCH 4.5 032/128] ARM: mvebu: fix GPIO config on the Linksys boards

[Greg Kroah-Hartman]

4.5-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Imre Kaloz <ka...@openwrt.org>

commit 9800917cf92f5b5fe5cae706cb70db8d014f663c upstream.

Some of the GPIO configs were wrong in the submitted DTS files,
this patch fixes all affected boards.

Signed-off-by: Imre Kaloz <ka...@openwrt.org>
Signed-off-by: Greg Kroah-Hartman <gre...@linuxfoundation.org>
Signed-off-by: Gregory CLEMENT <gregory.clem...@free-electrons.com>

---
 arch/arm/boot/dts/armada-385-linksys.dtsi     |    6 +++---
 arch/arm/boot/dts/armada-xp-linksys-mamba.dts |    4 ++--
 2 files changed, 5 insertions(+), 5 deletions(-)

--- a/arch/arm/boot/dts/armada-385-linksys.dtsi
+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
@@ -245,7 +245,7 @@
                button@2 {
                        label = "Factory Reset Button";
                        linux,code = <KEY_RESTART>;
-                       gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+                       gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
                };
        };
 
@@ -260,7 +260,7 @@
                };
 
                sata {
-                       gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+                       gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
                        default-state = "off";
                };
        };
@@ -313,7 +313,7 @@
 
 &pinctrl {
        keys_pin: keys-pin {
-               marvell,pins = "mpp24", "mpp47";
+               marvell,pins = "mpp24", "mpp29";
                marvell,function = "gpio";
        };
 
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -304,13 +304,13 @@
                button@1 {
                        label = "WPS";
                        linux,code = <KEY_WPS_BUTTON>;
-                       gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+                       gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
                };
 
                button@2 {
                        label = "Factory Reset Button";
                        linux,code = <KEY_RESTART>;
-                       gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+                       gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
                };
        };