Hi Frank,
Am Montag, 6. Juni 2016, 17:20:04 schrieb Frank Wang:
> The newer SoCs (rk3366, rk3399) take a different usb-phy IP block
> than rk3288 and before, and most of phy-related registers are also
> different from the past, so a new phy driver is required necessarily.
>
> Signed-off-by: Frank Wang <frank.w...@rock-chips.com>
> ---
[...]
> +static int rockchip_usb2phy_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct device_node *np = dev->of_node;
> + struct device_node *child_np;
> + struct phy_provider *provider;
> + struct rockchip_usb2phy *rphy;
> + const struct of_device_id *match;
> + int index, ret;
> +
> + rphy = devm_kzalloc(dev, sizeof(*rphy), GFP_KERNEL);
> + if (!rphy)
> + return -ENOMEM;
> +
> + match = of_match_device(dev->driver->of_match_table, dev);
> + if (!match || !match->data) {
> + dev_err(dev, "phy configs are not assigned!\n");
> + return -EINVAL;
> + }
> +
> + if (!dev->parent || !dev->parent->of_node)
> + return -EINVAL;
> +
> + rphy->grf = syscon_node_to_regmap(dev->parent->of_node);
> + if (IS_ERR(rphy->grf))
> + return PTR_ERR(rphy->grf);
> +
> + rphy->dev = dev;
> + rphy->phy_cfg = match->data;
> + platform_set_drvdata(pdev, rphy);
> +
> + ret = rockchip_usb2phy_clk480m_register(rphy);
> + if (ret) {
> + dev_err(dev, "failed to register 480m output clock\n");
> + return ret;
> + }
> +
> + rphy->vbus_host = devm_regulator_get_optional(dev, "vbus_host");
> + if (IS_ERR(rphy->vbus_host)) {
> + ret = PTR_ERR(rphy->vbus_host);
> + if (ret == -EPROBE_DEFER)
> + return ret;
> +
> + dev_info(dev, "vbus_host regulator is not assigned!\n");
> + rphy->vbus_host = NULL;
> + } else {
> + ret = regulator_enable(rphy->vbus_host);
> + if (ret)
> + return ret;
> + }
> +
> + index = 0;
> + for_each_available_child_of_node(np, child_np) {
> + struct rockchip_usb2phy_port *rport = &rphy->ports[index];
> + struct phy *phy;
> +
> + phy = devm_phy_create(dev, child_np, &rockchip_usb2phy_ops);
> + if (IS_ERR(phy)) {
> + dev_err(dev, "failed to create phy\n");
> + ret = PTR_ERR(phy);
> + goto put_child;
> + }
> +
> + rport->phy = phy;
> +
> + /* initialize otg/host port separately */
> + if (!of_node_cmp(child_np->name, "host-port")) {
> + ret = rockchip_usb2phy_host_port_init(rphy, rport,
> + child_np);
> + if (ret)
> + goto put_child;
> + }
> +
> + phy_set_drvdata(rport->phy, rport);
> +
> + /* to prevent out of boundary */
> + if (++index >= rphy->phy_cfg->num_ports)
> + break;
> + }
> +
> + provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> + return PTR_ERR_OR_ZERO(provider);
> +
> +put_child:
> + of_node_put(child_np);
> + return ret;
> +}
> +
> +static const struct rockchip_usb2phy_cfg rk3366_phy_cfgs = {
> + .num_ports = 2,
> + .clkout_ctl = { 0x0724, 15, 15, 1, 0 },
> + .port_cfgs = {
> + [USB2PHY_PORT_HOST] = {
> + .phy_sus = { 0x0728, 15, 0, 0, 0x1d1 },
> + .ls_det_en = { 0x0680, 4, 4, 0, 1 },
> + .ls_det_st = { 0x0690, 4, 4, 0, 1 },
> + .ls_det_clr = { 0x06a0, 4, 4, 0, 1 },
> + .utmi_ls = { 0x049c, 14, 13, 0, 1 },
> + .utmi_hstdet = { 0x049c, 12, 12, 0, 1 }
> + }
> + },
> +};
I also realized that the rk3399 has two of those phy-blocks, so I think we'll
need to adapt your data storage mechanism a tiny bit. Maybe something like
the following:
In the dts:
grf: syscon@ff770000 {
compatible = "rockchip,rk3366-grf", "syscon", "simple-mfd";
...
u2phy: usb2-phy@700 {
compatible = "rockchip,rk3366-usb2phy";
reg = <0x700 0x2c>;
...
};
};
In the driver
static const struct rockchip_usb2phy_cfg rk3366_phy_cfgs[] = {
{
.reg = 0x700,
.num_ports = 2,
.clkout_ctl = { 0x0724, 15, 15, 1, 0 },
.port_cfgs = {
[USB2PHY_PORT_HOST] = {
.phy_sus = { 0x0728, 15, 0, 0, 0x1d1 },
...
}
},
},
};
and in _probe then simply use the correct array entry matching the dts reg
property.
On the rk3399 this would then probably be
u2phy0: phy@e450 {
compatible = "rockchip,rk3366-usb2phy";
reg = <0xe450 0x10>;
...
};
u2phy1: phy@e460 {
compatible = "rockchip,rk3366-usb2phy";
reg = <0xe460 0x10>;
...
};
This is slightly similar to what we do with the emmc-phy. But also as the
usbphys differ in a lot of way, this is really only used to match to the data
block.
This only affects the match-data selection and the rest of the driver does not
need to be changed for this.
Heiko
> +static const struct of_device_id rockchip_usb2phy_dt_match[] = {
> + { .compatible = "rockchip,rk3366-usb2phy", .data = &rk3366_phy_cfgs },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, rockchip_usb2phy_dt_match);
> +
> +static struct platform_driver rockchip_usb2phy_driver = {
> + .probe = rockchip_usb2phy_probe,
> + .driver = {
> + .name = "rockchip-usb2phy",
> + .of_match_table = rockchip_usb2phy_dt_match,
> + },
> +};
> +module_platform_driver(rockchip_usb2phy_driver);
> +
> +MODULE_AUTHOR("Frank Wang <frank.w...@rock-chips.com>");
> +MODULE_DESCRIPTION("Rockchip USB2.0 PHY driver");
> +MODULE_LICENSE("GPL v2");
