[PATCH v2 6/6] drm/panel: simple: Add support for Sharp LQ123P1JX31 2400x1600 panel

[Yakir Yang]

The Sharp LQ123P1JX31 is an 12.3", 2400x1600 TFT-LCD panel connected
using eDP interfaces.

Signed-off-by: Yakir Yang <y...@rock-chips.com>
---
Changes in v2:
- Add detail timing of Sharp LQ123P1JX31 panel in v2

 drivers/gpu/drm/panel/panel-simple.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-simple.c 
b/drivers/gpu/drm/panel/panel-simple.c
index 067a5c4..38b6660 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1314,6 +1314,29 @@ static const struct panel_desc samsung_ltn140at29_301 = {
        },
 };
 
+static const struct drm_display_mode sharp_lq123p1jx31_mode = {
+       .clock = 252750,
+       .hdisplay = 2400,
+       .hsync_start = 2400 + 48,
+       .hsync_end = 2400 + 48 + 32,
+       .htotal = 2400 + 48 + 32 + 80,
+       .vdisplay = 1600,
+       .vsync_start = 1600 + 3,
+       .vsync_end = 1600 + 3 + 10,
+       .vtotal = 1600 + 3 + 10 + 33,
+       .vrefresh = 60,
+       .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
+};
+
+static const struct panel_desc sharp_lq123p1jx31 = {
+       .modes = &sharp_lq123p1jx31_mode,
+       .num_modes = 1,
+       .size = {
+               .width = 2400,
+               .height = 1600,
+       },
+};
+
 static const struct drm_display_mode shelly_sca07010_bfn_lnn_mode = {
        .clock = 33300,
        .hdisplay = 800,
@@ -1537,6 +1560,9 @@ static const struct of_device_id platform_of_match[] = {
                .compatible = "samsung,ltn140at29-301",
                .data = &samsung_ltn140at29_301,
        }, {
+               .compatible = "sharp,lq123p1jx31",
+               .data = &sharp_lq123p1jx31,
+       }, {
                .compatible = "shelly,sca07010-bfn-lnn",
                .data = &shelly_sca07010_bfn_lnn,
        }, {
-- 
1.9.1