Move Micron specific initialization logic into nand_micron.c. This is part of the "separate vendor specific code from core" cleanup process.
Signed-off-by: Boris Brezillon <boris.brezil...@free-electrons.com> --- drivers/mtd/nand/Makefile | 1 + drivers/mtd/nand/nand_base.c | 31 +--------------- drivers/mtd/nand/nand_ids.c | 3 +- drivers/mtd/nand/nand_micron.c | 84 ++++++++++++++++++++++++++++++++++++++++++ include/linux/mtd/nand.h | 20 ---------- 5 files changed, 88 insertions(+), 51 deletions(-) create mode 100644 drivers/mtd/nand/nand_micron.c diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index 403e9a7..f1bd008 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -59,5 +59,6 @@ obj-$(CONFIG_MTD_NAND_QCOM) += qcom_nandc.o nand-objs := nand_base.o nand_bbt.o nand_timings.o nand_ids.o nand-objs += nand_hynix.o +nand-objs += nand_micron.o nand-objs += nand_samsung.o nand-objs += nand_toshiba.o diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 931aafb..17fb6f6 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -3301,30 +3301,6 @@ ext_out: return ret; } -static int nand_setup_read_retry_micron(struct mtd_info *mtd, int retry_mode) -{ - struct nand_chip *chip = mtd_to_nand(mtd); - uint8_t feature[ONFI_SUBFEATURE_PARAM_LEN] = {retry_mode}; - - return chip->onfi_set_features(mtd, chip, ONFI_FEATURE_ADDR_READ_RETRY, - feature); -} - -/* - * Configure chip properties from Micron vendor-specific ONFI table - */ -static void nand_onfi_detect_micron(struct nand_chip *chip, - struct nand_onfi_params *p) -{ - struct nand_onfi_vendor_micron *micron = (void *)p->vendor; - - if (le16_to_cpu(p->vendor_revision) < 1) - return; - - chip->read_retries = micron->read_retry_options; - chip->setup_read_retry = nand_setup_read_retry_micron; -} - /* * Check if the NAND chip is ONFI compliant, returns 1 if it is, 0 otherwise. */ @@ -3421,9 +3397,6 @@ static int nand_flash_detect_onfi(struct nand_chip *chip) pr_warn("Could not retrieve ONFI ECC requirements\n"); } - if (p->jedec_id == NAND_MFR_MICRON) - nand_onfi_detect_micron(chip, p); - return 1; } @@ -3662,9 +3635,7 @@ static void nand_decode_bbm_options(struct nand_chip *chip) */ if ((nand_is_slc(chip) && (maf_id == NAND_MFR_AMD || - maf_id == NAND_MFR_MACRONIX)) || - (mtd->writesize == 2048 && - maf_id == NAND_MFR_MICRON)) + maf_id == NAND_MFR_MACRONIX))) chip->bbt_options |= NAND_BBT_SCAN2NDPAGE; } diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c index 2cc9d32..5d02787 100644 --- a/drivers/mtd/nand/nand_ids.c +++ b/drivers/mtd/nand/nand_ids.c @@ -169,6 +169,7 @@ struct nand_flash_dev nand_flash_ids[] = { extern const struct nand_manufacturer_ops toshiba_nand_manuf_ops; extern const struct nand_manufacturer_ops samsung_nand_manuf_ops; extern const struct nand_manufacturer_ops hynix_nand_manuf_ops; +extern const struct nand_manufacturer_ops micron_nand_manuf_ops; struct nand_manufacturers nand_manuf_ids[] = { {NAND_MFR_TOSHIBA, "Toshiba", &toshiba_nand_manuf_ops}, @@ -178,7 +179,7 @@ struct nand_manufacturers nand_manuf_ids[] = { {NAND_MFR_RENESAS, "Renesas"}, {NAND_MFR_STMICRO, "ST Micro"}, {NAND_MFR_HYNIX, "Hynix", &hynix_nand_manuf_ops}, - {NAND_MFR_MICRON, "Micron"}, + {NAND_MFR_MICRON, "Micron", µn_nand_manuf_ops}, {NAND_MFR_AMD, "AMD/Spansion"}, {NAND_MFR_MACRONIX, "Macronix"}, {NAND_MFR_EON, "Eon"}, diff --git a/drivers/mtd/nand/nand_micron.c b/drivers/mtd/nand/nand_micron.c new file mode 100644 index 0000000..2303e45 --- /dev/null +++ b/drivers/mtd/nand/nand_micron.c @@ -0,0 +1,84 @@ +/* + * Copyright (C) 2013 Boris Brezillon <boris.brezil...@free-electrons.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/mtd/nand.h> + +struct nand_onfi_vendor_micron { + u8 two_plane_read; + u8 read_cache; + u8 read_unique_id; + u8 dq_imped; + u8 dq_imped_num_settings; + u8 dq_imped_feat_addr; + u8 rb_pulldown_strength; + u8 rb_pulldown_strength_feat_addr; + u8 rb_pulldown_strength_num_settings; + u8 otp_mode; + u8 otp_page_start; + u8 otp_data_prot_addr; + u8 otp_num_pages; + u8 otp_feat_addr; + u8 read_retry_options; + u8 reserved[72]; + u8 param_revision; +} __packed; + + +static int micron_nand_setup_read_retry(struct mtd_info *mtd, int retry_mode) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + uint8_t feature[ONFI_SUBFEATURE_PARAM_LEN] = {retry_mode}; + + return chip->onfi_set_features(mtd, chip, ONFI_FEATURE_ADDR_READ_RETRY, + feature); +} + +/* + * Configure chip properties from Micron vendor-specific ONFI table + */ +static int micron_nand_onfi_init(struct nand_chip *chip) +{ + struct nand_onfi_params *p = &chip->onfi_params; + struct nand_onfi_vendor_micron *micron = (void *)p->vendor; + + if (!chip->onfi_version) + return 0; + + if (le16_to_cpu(p->vendor_revision) < 1) + return 0; + + chip->read_retries = micron->read_retry_options; + chip->setup_read_retry = micron_nand_setup_read_retry; + + return 0; +} + +static int micron_nand_init(struct nand_chip *chip) +{ + struct mtd_info *mtd = nand_to_mtd(chip); + int ret; + + ret = micron_nand_onfi_init(chip); + if (ret) + return ret; + + if (mtd->writesize == 2048) + chip->bbt_options |= NAND_BBT_SCAN2NDPAGE; + + return 0; +} + +const struct nand_manufacturer_ops micron_nand_manuf_ops = { + .init = micron_nand_init, +}; diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index c0a1e36..0bdea71 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -348,26 +348,6 @@ struct onfi_ext_param_page { */ } __packed; -struct nand_onfi_vendor_micron { - u8 two_plane_read; - u8 read_cache; - u8 read_unique_id; - u8 dq_imped; - u8 dq_imped_num_settings; - u8 dq_imped_feat_addr; - u8 rb_pulldown_strength; - u8 rb_pulldown_strength_feat_addr; - u8 rb_pulldown_strength_num_settings; - u8 otp_mode; - u8 otp_page_start; - u8 otp_data_prot_addr; - u8 otp_num_pages; - u8 otp_feat_addr; - u8 read_retry_options; - u8 reserved[72]; - u8 param_revision; -} __packed; - struct jedec_ecc_info { u8 ecc_bits; u8 codeword_size; -- 2.7.4