The configuration of the clock depend of the gpio latch. This information is stored in the gpio block registers. That's why the block is shared using a syscon node.
Signed-off-by: Gregory CLEMENT <[email protected]> --- arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index 9e2efb882983..7c61e13a16f3 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -105,6 +105,18 @@ status = "disabled"; }; + gpio1: gpio@13800 { + compatible = "marvell,mvebu-gpio-3700", + "syscon", "simple-mfd"; + reg = <0x13800 0x500>; + + xtalclk: xtal-clk { + compatible = "marvell,armada-3700-xtal-clock"; + clock-output-names = "xtal"; + #clock-cells = <0>; + }; + }; + usb3: usb@58000 { compatible = "marvell,armada3700-xhci", "generic-xhci"; -- 2.5.0
