On Tue,  7 Jun 2016 22:41:47 +0200
Maxime Ripard <[email protected]> wrote:

> Add support for the various dividers (linear, table or pow-of-two based)
> found in the CCU.
> 
> Signed-off-by: Maxime Ripard <[email protected]>
> ---
>  drivers/clk/sunxi-ng/Makefile  |   1 +
>  drivers/clk/sunxi-ng/ccu_div.c | 136 
> +++++++++++++++++++++++++++++++++++++++++
>  drivers/clk/sunxi-ng/ccu_div.h | 135 ++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 272 insertions(+)
>  create mode 100644 drivers/clk/sunxi-ng/ccu_div.c
>  create mode 100644 drivers/clk/sunxi-ng/ccu_div.h
> 
> diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
> index c47cbd309d59..67a2559fe283 100644
> --- a/drivers/clk/sunxi-ng/Makefile
> +++ b/drivers/clk/sunxi-ng/Makefile
> @@ -3,6 +3,7 @@ obj-y += ccu_reset.o
>  
>  obj-y += ccu_frac.o
>  
> +obj-y += ccu_div.o
>  obj-y += ccu_fixed_factor.o
>  obj-y += ccu_gate.o
>  obj-y += ccu_mux.o
> diff --git a/drivers/clk/sunxi-ng/ccu_div.c b/drivers/clk/sunxi-ng/ccu_div.c
> new file mode 100644
> index 000000000000..8659b4cb6c20
> --- /dev/null
> +++ b/drivers/clk/sunxi-ng/ccu_div.c
> @@ -0,0 +1,136 @@
        [snip]
> diff --git a/drivers/clk/sunxi-ng/ccu_div.h b/drivers/clk/sunxi-ng/ccu_div.h
> new file mode 100644
> index 000000000000..5edbdc1a98c8
> --- /dev/null
> +++ b/drivers/clk/sunxi-ng/ccu_div.h
> @@ -0,0 +1,135 @@
        [snip]
> +#define SUNXI_CCU_M_WITH_GATE(_struct, _name, _parent, _reg,         \
> +                           _mshift, _mwidth, _gate,                  \
> +                           _flags)                                   \
> +     struct ccu_div _struct = {                                      \
> +             .enable = _gate,                                        \
> +             .div    = _SUNXI_CCU_DIV(_mshift, _mwidth),             \
> +             .common = {                                             \
> +                     .reg            = _reg,                         \
> +                     .features       = CCU_FEATURE_GATE,             \
> +                     .hw.init        = SUNXI_HW_INIT(_name,          \
> +                                                     _parent,        \
> +                                                     &ccu_div_ops,   \
> +                                                     _flags),        \
> +             },                                                      \
> +     }
> +
> +#define SUNXI_CCU_M(_struct, _name, _parent, _reg, _mshift, _mwidth, \
> +                 _flags)                                             \
> +     SUNXI_CCU_M_WITH_GATE(_struct, _name, _parent, _reg,            \
> +                           _mshift, _mwidth, 0, _flags)
        [snip]

This shows that the flag CCU_FEATURE_GATE is perfectly useless...

-- 
Ken ar c'hentaƱ |             ** Breizh ha Linux atav! **
Jef             |               http://moinejf.free.fr/

Reply via email to