On 07/06/16 06:23, Peter Meerwald-Stadler wrote:
> 
>> Replace the code that guarantees the device stays in direct mode
>> with iio_device_claim_direct_mode() which does same.  This allows
>> removal of an unused lock in the device private global data.
> 
> Acked-by: Peter Meerwald-Stadler <[email protected]>
Applied, thanks.

Joanthan
>  
>> Signed-off-by: Alison Schofield <[email protected]>
>> Cc: Daniel Baluta <[email protected]>
>> ---
>>  drivers/iio/light/tcs3414.c | 12 +++++-------
>>  1 file changed, 5 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/iio/light/tcs3414.c b/drivers/iio/light/tcs3414.c
>> index f90f8c5..8a15fb5 100644
>> --- a/drivers/iio/light/tcs3414.c
>> +++ b/drivers/iio/light/tcs3414.c
>> @@ -53,7 +53,6 @@
>>  
>>  struct tcs3414_data {
>>      struct i2c_client *client;
>> -    struct mutex lock;
>>      u8 control;
>>      u8 gain;
>>      u8 timing;
>> @@ -134,16 +133,16 @@ static int tcs3414_read_raw(struct iio_dev *indio_dev,
>>  
>>      switch (mask) {
>>      case IIO_CHAN_INFO_RAW:
>> -            if (iio_buffer_enabled(indio_dev))
>> -                    return -EBUSY;
>> -            mutex_lock(&data->lock);
>> +            ret = iio_device_claim_direct_mode(indio_dev);
>> +            if (ret)
>> +                    return ret;
>>              ret = tcs3414_req_data(data);
>>              if (ret < 0) {
>> -                    mutex_unlock(&data->lock);
>> +                    iio_device_release_direct_mode(indio_dev);
>>                      return ret;
>>              }
>>              ret = i2c_smbus_read_word_data(data->client, chan->address);
>> -            mutex_unlock(&data->lock);
>> +            iio_device_release_direct_mode(indio_dev);
>>              if (ret < 0)
>>                      return ret;
>>              *val = ret;
>> @@ -288,7 +287,6 @@ static int tcs3414_probe(struct i2c_client *client,
>>      data = iio_priv(indio_dev);
>>      i2c_set_clientdata(client, indio_dev);
>>      data->client = client;
>> -    mutex_init(&data->lock);
>>  
>>      indio_dev->dev.parent = &client->dev;
>>      indio_dev->info = &tcs3414_info;
>>
> 

Reply via email to