On 11/06/16 16:57, Jonathan Cameron wrote:
> On 07/06/16 06:23, Peter Meerwald-Stadler wrote:
>>
>>> Replace the code that guarantees the device stays in direct mode
>>> with iio_device_claim_direct_mode() which does same.  This allows
>>> removal of an unused lock in the device private global data.
>>
>> nice!
>> Acked-by: Peter Meerwald-Stadler <pme...@pmeerw.net>
> Applied and pushed out as testing for the autobuilders to play with it.
Actually hold that - see the tcs3472 response.  This lock isn't actually
here to prevent the buffer running at the same time as the raw call...

Backed out for now.

Jonathan
> 
> Thanks,
> 
> Jonathan
>>
>>> Signed-off-by: Alison Schofield <amsfiel...@gmail.com>
>>> Cc: Daniel Baluta <daniel.bal...@gmail.com>
>>> ---
>>>  drivers/iio/light/isl29125.c | 10 ++++------
>>>  1 file changed, 4 insertions(+), 6 deletions(-)
>>>
>>> diff --git a/drivers/iio/light/isl29125.c b/drivers/iio/light/isl29125.c
>>> index e2945a2..a6b9d66 100644
>>> --- a/drivers/iio/light/isl29125.c
>>> +++ b/drivers/iio/light/isl29125.c
>>> @@ -50,7 +50,6 @@
>>>  
>>>  struct isl29125_data {
>>>     struct i2c_client *client;
>>> -   struct mutex lock;
>>>     u8 conf1;
>>>     u16 buffer[8]; /* 3x 16-bit, padding, 8 bytes timestamp */
>>>  };
>>> @@ -128,11 +127,11 @@ static int isl29125_read_raw(struct iio_dev 
>>> *indio_dev,
>>>  
>>>     switch (mask) {
>>>     case IIO_CHAN_INFO_RAW:
>>> -           if (iio_buffer_enabled(indio_dev))
>>> -                   return -EBUSY;
>>> -           mutex_lock(&data->lock);
>>> +           ret = iio_device_claim_direct_mode(indio_dev);
>>> +           if (ret)
>>> +                   return ret;
>>>             ret = isl29125_read_data(data, chan->scan_index);
>>> -           mutex_unlock(&data->lock);
>>> +           iio_device_release_direct_mode(indio_dev);
>>>             if (ret < 0)
>>>                     return ret;
>>>             *val = ret;
>>> @@ -259,7 +258,6 @@ static int isl29125_probe(struct i2c_client *client,
>>>     data = iio_priv(indio_dev);
>>>     i2c_set_clientdata(client, indio_dev);
>>>     data->client = client;
>>> -   mutex_init(&data->lock);
>>>  
>>>     indio_dev->dev.parent = &client->dev;
>>>     indio_dev->info = &isl29125_info;
>>>
>>
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

Reply via email to