-----Original Message----- From: Jeremy L. Moles [mailto:[EMAIL PROTECTED] Sent: Thursday, February 01, 2007 7:05 AM To: Brian D. McGrew Cc: [EMAIL PROTECTED]; linux-kernel@vger.kernel.org Subject: Re: 2.6.16.16 Lost CD-ROM Drive
On Thu, 2007-02-01 at 07:00 -0800, Brian D. McGrew wrote: > Hey guys- > > Have a Precision workstation with SATA hard drive and SATA CD-ROM. If I > load Fedora Core 5 with a stock 2.6.15 kernel, life is good. > > However, I need to use 2.6.16.16. Once I build and install this kernel, > my CD-ROM drive is gone. There is a log entry in dmesg that says "ATAPI > not support. Ignoring." > > If I go into the BIOS and set the SATA operations to Legacy/Compatible > then everything is fine. I've rebuilt this kernel about 100 times > trying everything I can think of. > > When I have SATA set to legacy, the HDD and CD are detected as /dev/hd* > and when they're set to SATA Normal operation the HDD is detected as > /dev/sda. If I boot my old 2.6.15 (stock install) kernel then the CD is > found as /dev/sdc. > > I've even tried taking the installation default configuration file for > the 2.6.15 kernel and just wholesale copying it into my 2.6.16.16 kernel > and build that way but still no go. > > What am I missing to get the 2.6.16.16 kernel to see a SATA CD-ROM drive > in normal, non-legacy move? Try booting 2.6.16 with the following options: libata.atapi_enabled=1 ide0=noprobe ide1=noprobe ----- Still no go. /dev/sda* is created for the hard drive but no CD-ROM and the same ATAPI error in dmesg. -brian - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
