On 06/14, Linus Walleij wrote:
> The RPM in MSM8660/APQ8060 has different offsets to the selector
> ACK and request context ACK registers. Make all these register
> offsets part of the per-SoC data and assign the right values.
>
> The bug was found by verifying backwards to the vendor tree in
> the out-of-tree files <mach/rpm-[8660|8064|8960]>: all were using
> offsets 3,11,15,23 except the MSM8660/APQ8060 which was using
> offsets 3,11,19,27.
>
> Cc: sta...@vger.kernel.org
> Fixes: 58e214382bdd ("mfd: qcom-rpm: Driver for the Qualcomm RPM")
> Cc: Björn Andersson <bjorn.anders...@linaro.org>
> Cc: Stephen Boyd <sb...@codeaurora.org>
> Signed-off-by: Linus Walleij <linus.wall...@linaro.org>
Good catch! That macro maze is fun.
> ---
> drivers/mfd/qcom_rpm.c | 37 +++++++++++++++++++++++++++----------
> 1 file changed, 27 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/mfd/qcom_rpm.c b/drivers/mfd/qcom_rpm.c
> index 4f589cf75549..82cc7986e1ca 100644
> --- a/drivers/mfd/qcom_rpm.c
> +++ b/drivers/mfd/qcom_rpm.c
> @@ -34,7 +34,11 @@ struct qcom_rpm_resource {
> struct qcom_rpm_data {
> u32 version;
> const struct qcom_rpm_resource *resource_table;
> - unsigned n_resources;
> + unsigned int n_resources;
> + unsigned int req_ctx_off;
> + unsigned int req_sel_off;
> + unsigned int ack_ctx_off;
> + unsigned int ack_sel_off;
> };
>
> struct qcom_rpm {
> @@ -61,10 +65,6 @@ struct qcom_rpm {
>
> #define RPM_REQUEST_TIMEOUT (5 * HZ)
>
> -#define RPM_REQUEST_CONTEXT 3
> -#define RPM_REQ_SELECT 11
> -#define RPM_ACK_CONTEXT 15
> -#define RPM_ACK_SELECTOR 23
> #define RPM_SELECT_SIZE 7
The RPM_SELECT_SIZE is 7 on 8660, but now you've pointed out that
otherwise the size is 4. I think you've uncovered another bug.
>
> #define RPM_NOTIFICATION BIT(30)
> @@ -398,10 +414,10 @@ int qcom_rpm_write(struct qcom_rpm *rpm,
> bitmap_set((unsigned long *)sel_mask, res->select_id, 1);
> for (i = 0; i < ARRAY_SIZE(sel_mask); i++) {
> writel_relaxed(sel_mask[i],
> - RPM_CTRL_REG(rpm, RPM_REQ_SELECT + i));
> + RPM_CTRL_REG(rpm, rpm->data->req_sel_off + i));
Here we write from 0 to ARRAY_SIZE(sel_mask) which is 7. That
would mean we write into the ack context that starts at 15 (we
start writing at req_sel_off which is always 11). Oops.
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
